Home Blog Page 72

WAS THE MATRYX NECESSARY?

0

I guess the question we’re asking here is this: Did Polaris really need to come up with a replacement for the AXYS?

Frankly, the AXYS, powered by the company’s 850 twin, was and still is a huge force to be reckoned with. When it comes to mountain and powder-targeted sleds, this combo is pretty much unbeatable – even in 2020 – when comparing weight, power and handling to any of the competition.

However, although it won’t be this year, certainly at some time in the future Polaris’ vertical sleds will undoubtedly become Matryx-based snowmobiles.

Looking at it on the surface and trying to draw conclusions on why the Matryx was introduced in what seemed to be the middle of the AXYS platform’s hayday, we’ve had to give the answer a lot of consideration.

Frankly, we’re pretty sure it didn’t have anything to do with handling or riding flaws with the AXYS. It’s pretty much at the top of the industry in those categories, especially when it comes to handling. It may be a skinny second to Ski-Doo’s rMotion when it comes to ride quality – but it’s certainly not far off the mark in head-to-head comparisons. The shortage, if any at all is likely due to calibration, not some inherent shortfall with the AXYS chassis.

When you look at weight, it raises more eyebrows. The AXYS is still the industry leader for lightness. Maybe the Matryx is a tad lighter (not confirmed yet) but the AXYS RMK and Assault 144 have led their categories in lightness for a few years decisively taking that advantage away from Ski-Doo.

Here’s what we’re thinking. Polaris has been on the hunt to increase market share beyond Ski-Doo’s stranglehold since before SD’s G4 chassis was introduced. Looking into the crystal ball, we believe Polaris felt by the end of the G4’s run, any new Ski-Doo (G5?) could possess the lightness and handling upgrades necessary to possibly equal Polaris.

Keep in mind, it’s always easier to raise the engineering ante when the model of what you want to exceed is clearly before your eyes. This was the case with Ski-Doo. It could see where it needed to go and would potentially be able to come with a Polaris-beater any time before the AXYS was finished its run.

Same goes for Arctic Cat. Cat’s mountain and deep snow sled program has been very aggressive, and Polaris knew it wouldn’t be long before there was a new ProCross II chassis coming out of Thief River Falls. Undoubtedly, it would be as light as the AXYS, would handle as good or even better and ride with the same level of comfort as the G4 or the AXYS.

Sure, the difference wouldn’t be blinding and the AXYS would still be competent, but how many riders might walk away from Polaris showrooms and buy something just as good – maybe even better – from Ski-Doo or Cat?

It’s all about planning and taking aim at the competition. Not necessarily where the competition is right now – but rather – where it’s going to be a few years down the road! Thus the Matryx!

ABB and Taiga Partnership

0

Global e-mobility leader ABB has partnered with Taiga Motors, maker of electric powersports vehicles, to expand sustainability to off-road vehicles across North America and Europe. ABB will offer its safe, reliable and compact Terra AC wallbox and Terra DC wallbox charging stations.

The global powersports market delivered record-breaking sales this year and is expected to continue growing rapidly with a compound annual growth rate at over 6% between 2020 and 2026 according to Global Market Insights. But this growth may take an environmental toll because snowmobiles are one of the few vehicles that do not require a catalytic converter, a device that reduces the amount of harmful pollutants from a vehicle.

The absence of this converter leads to disproportionate emission levels to the point where electrifying one snowmobile can have the same environmental impact as electrifying more than forty cars.

Canada-based Taiga Motors is heralding a new era of electrification for off-road vehicles with the world’s first production electric snowmobiles and personal watercrafts. By eliminating noise pollution and reducing the vehicles’ environmental impact, this partnership leads the way to a sustainable future at a time when countries have increased regulations at national parks, lakes and trails worldwide.

ABB will enable Taiga Motors to bring reliable and effective charging solutions to its customers. For recreational vehicles, the two key factors are ensuring power and performance, which are both fulfilled by Taiga Motors’ electric offerings that feature more torque and faster acceleration.

ABB lays the foundations for a future of safe, smart, and sustainable mobility, accessible by everyone, everywhere by providing charging solutions that meet the needs of the next generation of electric vehicles. Its e-mobility solutions form an important part of ABB Electrifications ‘Mission to Zero’ initiative, which supports carbon reduction with solutions which use less and cleaner energy.

This partnership will encourage adoption of EVs across North America and Europe by making it easier for recreational riders and fleet operators to charge their off-road vehicles at marinas, ski resorts, popular trails, and even remote riding areas such as the mountainous backcountry.

ABB’s charging stations, designed to work in harsh weather conditions, are a perfect fit as these vehicles will be operated in some of the most extreme environments.

Since entering the EV charging space nearly a decade ago, ABB has driven sustainable transportation forward having sold more than 17,000 DC fast chargers in over 80 countries across the world. With its entry into the electric off-road vehicles charging, ABB remains committed to driving innovation in the sector.

“We are excited to play an integral role in making the rollout of the world’s first off-road vehicles a success while reinforcing our commitment to sustainability,” said Frank Muehlon, Head of ABB’s global business for E-mobility Infrastructure Solutions.

“We envision a future where riders can explore the great outdoors without transporting fuel. Renewable powered batteries can be placed in remote areas to provide off-grid charging, so adventurers can simply plug in and go further than ever before,” said Samuel Bruneau, Chief Executive Officer and Co-Founder at Taiga Motors.

Taiga Motors will begin delivery of its electric snowmobiles for fleets this winter season and will increase next fall. Deliveries of its Orca electric personal watercrafts will begin next year during spring. This partnership will support the transition to more sustainable outdoor adventures by providing a turnkey solution to customers.

ABB (ABBN: SIX Swiss Ex) is a leading global technology company that energizes the transformation of society and industry to achieve a more productive, sustainable future. By connecting software to its electrification, robotics, automation and motion portfolio, ABB pushes the boundaries of technology to drive performance to new levels. With a history of excellence stretching back more than 130 years, ABB’s success is driven by about 110,000 talented employees in over 100 countries.

Taiga Motors was founded in 2015 by a group of engineers that believed there should not exist a compromise between exhilarating powersport pursuits and sacrificing the environment. Taking on one of the most challenging vehicle segments to electrify, Taiga has pushed the frontiers of electric technology to achieve the extreme power, weight and thermal specifications required to outperform the high performance but polluting 2-stroke engine. The result is the world’s first electric snowmobile and watercraft designed from the ground up that is faster, more reliable, more efficient & better connected to the great outdoors.

taigamotors.ca

Ski-Doo EFI Technology

Dear Motorhead –

Correct me if I am wrong, but “Ski Doo” never made an EFI injection system on a 2-stroke. Old technology. No surprise there.

Troy McDonald

Troy!

Thanks for your comment. It concerns me when I realize I’ve been around long enough to remember not just landmark sleds of the past but obscure ones as well.

To answer your inquiry Ski-Doo (with Rotax) did develop and produce a sophisticated (for its time) EFI system which was fitted on the Rotax Rotary Valve 580cc twin cylinder engine and stuffed into a PRS chassis variant called the “Formula Plus EFI” or more specifically the “Plus EFI”.

The sled or more appropriately, the EFI system, was a one hit wonder living as a very limited production (I believe one per dealer – late release) powerplant. It disappeared faster than it arrived.

I may stand to be corrected here but I’m pretty sure the EFI system was developed in cooperation with Mikuni. This was a departure from the JECS systems both Polaris and Arctic Cat used at this time. Oh, what time are we talking about? I believe the “Plus EFI” was officially a 1992 model.

We had a Press Unit here at Supertrax and found it to be a nice improvement over carbs – except for one problem – the system was riddled with glitches which further undermined Ski-Doo’s reliability reputation they were working intently at improving in the early 90’s.

Everybody who rode the Plus EFI had at least one return trip on the rope. Ski-Doo never fiddled with EFI again until the arrival of the Semi-Direct Injection SDI 600 and 800 Rotax Series III engines in the early 00’s.

There’s more to the arrival of EFI on snowmobiles that’s interesting. I think I’ll write a column soon on how costly the patent infringement settlement was between Ron Chastain – owner of Injection Research Services (IRS) and Polaris. It is an interesting 30 year old tale.

Motorhead Mark

HOW LONG SHOULD A 2-STROKE LAST?

0

Thought I might try and answer, from personal experience and observation, a burning question that appears to be weighing heavily on the minds of our loyal followers. The question? How long should a 2-stroke snowmobile last?

Before I delve into this complex question and gift you with one of my highly-informed diatribes, I need to make one caveat clear. The word “last” is a little ominous when discussing anything related to snowmobiles. For our purposes I will suggest “last” really means: “before significant jing needs to be spent”.

If we’re talking the two most popular segments in the sno-mo-2-stroke market, the 600 and 800 class, we’ll jump into the 600 class first. A current garden variety 600 twin engine in the popular trail/sport category can deliver up to 12,000 miles (19,000 kms) of reasonable use.

Reasonable use includes using good quality injector oil, regular servicing of the exhaust valves and annual clutch maintenance. Clutch maintenance, although not specifically engine maintenance, can affect the performance and longevity of a 2-stroke mill.

Are there exceptions to this mileage threshold? For sure! In fact, I’ve seen lots of 600 2-strokes with more miles than I’ve posited. For the record, I’ve seen less.

Do 800’s live longer or shorter than 600’s? Here are some issues: There have been some 800 class engines that live considerably longer than others. Take Arctic Cat’s 800 EFI Suzuki, laydown, backwards twin from a few years back. This engine is virtually indestructible – with few exceptions. Suzuki has a stellar rep for building long lasting, durable engines – both 2 and 4-stroke. If you can stand the smoking these anvils are known for, you can get huge miles out of one. How many miles? Maybe 15,000 (24,000 km) or more.

At the other end of the spectrum is Ski-Doo’s Series III 800 2-stroke used through the 2016 model year. These engines were notorious for kicking cranks out when the PTO (left side) bearings’ sealed Isoflex lubrication dried out or leaked out.

I’ve commented on these engines usable life spans many times in Supertrax Magazine. When one of these motors gets to 6,000 miles or 10,000 klicks you must re-lubricate or replace the PTO side crank bearings. To do this in a meaningful way most often requires major engine disassembly. If you don’t do this necessary work, you’re playing a game of sno-mo crankshaft roulette.

Do snowmobile 2-strokes need to have rings and pistons replaced every 10,000 miles? Not necessarily. A thorough look-see at the motor through the exhaust port and a standard compression test not to mention your seat-of-pants evaluation of power, acceleration and piston slap (rattle) will expose a wealth of information.

Keep in mind that the mileage thresholds I’ve mentioned here are also good for evaluating chassis wear. Any sled with more than 10,000 miles on the odometer should have the drive axle, jackshaft and chaincase bearings examined carefully. Replacing them at the 16,000 klick mark (IMO) is good preventative maintenance.

While performing this kind of chassis service at these mileage levels, take a look at the skidframe tires and bearings. Tires are prone to blow out from bearing failure once you pass the 10K mileage level. Trust me – it’ll almost always happen on a WOT run down Kevlar Lake.

No doubt I’ll receive lots of disagreeing hate mail from this brief and highly generalized article. Fine. However, there really is no magic number for how long a 2-stroke will last. What is for sure is this: You will, without any doubt, enjoy longer, trouble-free service from your 2-stroke if you look after it.

SKI-DOO’S G4 RENEGADE GOES DOUBLE XX

0

***ADVERTORIAL***

There’s no doubt Ski-Doo loves acronyms and, in particular, acronyms using the letter X. Let’s look at the latest variant of the now well-known and respected G4 platform.

The newness is not just sizzle but bonafide triple A steak. Let’s deal with the Renegade first. Take your Renegade X and X-RS models and mix in new technology called RAS-X IFS, rMotion X skid and TS-X adjustable skis.

Visit skidoo.com for more.

In a very tangible way, these new elements alter what we’ve come to expect from the G4 Renegade X and X-RS platforms. For MY 2021 these improvements are only available on X and X-RS models.

The new, wider RAS-X Renegade front end alters the roll center of the G4 chassis and in doing so lowers the center of gravity of the sled making it feel more planted when pushed to the center of a turn. The result is vastly improved initial turn-in and stronger bite up to and beyond the apex.

The new version of rMotion X takes the cornering forces the chassis is processing and manages them more effectively with laser-level posture as power is re-applied on corner exit.

Visit skidoo.com for more.

The completely redesigned TS-X tuneable skis provide dramatically improved bite on varying snow surfaces without constant fiddling to compensate for minor variances in grip. This newly minted ski is now the perfect match for the G4 chassis with the aforementioned “X” improvements.

We were able to dial-in carbide depth easily and experience a much wider range of adjustability with each subsequent click of the TS-X threaded adjusters.

Without doubt Ski-Doo’s rMotion has been the benchmark for snowmobile suspension response. You’ll be happy to hear the new rMotion X swallows trail junk with the same appetite it’s had the past ten years.

Visit skidoo.com for more.

If you wish to dial-in more weight transfer, the Renegade’s all-new front torque arm provides a simple-to-tweak, eccentric lower mounting fixture.

Maybe the most profound difference in the new “X” G4 package is front end handling and bump absorption. We found the RAS-X IFS to be exceptionally linear and stable, displaying no nervousness on high-speed trails while producing a confidence-inspiring response to steering inputs.

Put it this way: If you currently ride a G4 Renegade you will immediately discern the improvement in overall handling and suspension response the new RAS-X, rMotion-X and TS-X skis produce.

Check out the full line of Ski-Doo snowmobiles at skidoo.com.

WILL POLARIS EVER RACE ITS NEW 650?

0

This fall there’s been scuttle in the biz that Polaris has done something terrible with the introduction of the 650 Patriot. In fact, some are crowing the 650 has no future because it can’t be homologated for 600 class snocross and XC racing.

Okay, here’s something to chew on. Snowmobile racing, in particular, sno-X racing, is not driving consumer snowmobile product sales or designs like it did a decade (or more) ago.

There was a day when the argument against a 650 might have gained traction because snocross competition wouldn’t allow a 650. Today, the importance of sno-X to the real world of selling consumer sleds has been severely diminished.

At the same time, racing, as a sales influencer, began to lose importance, extreme deep snow riding exploded on the snowmobile landscape. Today’s marketable heroes have names like Burandt, Kuster and McClure. Younger demo riders see themselves high-marking a bowl, cornice jumping and gliding handlebar deep in powder – even if they ride east of the Mississippi. Go figure.

An argument against a consumer 650 based on the aforementioned rationale doesn’t work. To prove this point Polaris just introduced a new 600 race engine, currently being homologated for sno-X and XC racing purposes.

Polaris’ new 600R racing engine is literally, a cannon, and will be more than adequate to hold down the company’s enviable position in these two racing disciplines.

So there you have it – Polaris will race a new hot-rod 600 and consumers will have full, unfettered access to the new Patriot 650.

The move to a 650-size engine will be accepted just as quickly and with as much enthusiasm in the consumer marketplace as the move to 850’s has been in the top performance market. Racing will go on using 600cc engines for as long as there is racing.

The consumer marketplace, not linked to the degree it was to racing, will see a move to 650cc engines. And yes, in all likelihood, Ski-Doo will follow this trend with its own brand new 650!

SKI-DOO AND ARCTIC CAT BURY THE AXE!

0

For those of you who regularly read SUPERTRAX Magazine you may have seen my editorial opinion piece in the most recent issue

The topic was the ongoing legal battle between Ski-Doo (BRP) and Arctic Cat (Textron) surrounding an infringement by Arctic Cat on a Canadian patent.

The patent covers the pyramidal frame and bulkhead (engine cradle) and is owned by BRP. The Canadian Federal Court ruled in favor of Ski-Doo and last spring Arctic Cat was notified by the Court it could not sell any snowmobiles in Canada with the aforementioned pyramidal frame design.

Oh, yes, there’s the small issue of multiple millions of dollars awarded to Ski-Doo for every sled using the design going back to the mid 00’s.

I’ll cut to the chase. As of late last week a press release from Arctic Cat/Textron appeared here at SnowTrax/Supertrax World HQ boldy announcing a deal had been cut and an agreement consummated that will immediately allow Arctic Cat and its Canadian Dealers to resume sales again and deliver ordered sleds to dealers and to foaming-at-the-mouth early-order AC retail customers.

The collective sigh of relief emanating from Arctic Cat snowmobile dealers across Canada could be heard all the way to Thief River Falls, Minnesota.

Interestingly, this same situation cropped up a few years back between Arctic Cat USA and BRP. The issue was ruled on in the US judicial system and AC won. We’ve been told BRP’s US patents were not as airtight as the Canadian patents covering the same technology.

As a result Arctic Cat likely assumed it would win the issue in Canada and Ski-Doo likely knew Arctic Cat wouldn’t. Doesn’t matter. The deal has been struck and we couldn’t be happier.

The terms of the settlement are not known to the unwashed general public and media at this time. However, we’ll take a little stab here regarding an item that Arctic Cat has and BRP might just want.

A little bird (not a Cat) told us this story. It’s no deep, dark secret Ski-Doo may have looked at bringing its European Lynx snowmobiles to the North American market. A big clue was this: Arctic Cat refreshed its North American Lynx trademark just a few years ago. After many years of being moth-balled, the company even offered a domestic Lynx model to draw a line in the snow.

We gotta think when AC heard SD was sniffing around North America evaluating a Lynx introduction on this side of the pond, Cat’s legal counsel got a phone call to made sure it had boiler plate rights to the Lynx handle.

That’s how stuff in the sno-mo-biz works.

There have been lots of deals cut going back 25 years on licensed technology owned by the four OEMs. We wouldn’t be shocked to find out sometime in the future the Lynx trademark got thrown into the settlement between these two manufacturers.

In the meantime its good to know Arctic Cat can do biz in the Canadian market again and these two respected powersport OEMs can stop throwing copious amounts of jing at this contentious, energy and resource depleting confrontation.

BRP AND CAT REACH GLOBAL SETTLEMENT

Bombardier Recreational Products Inc. (“BRP”) (TSX: DOO; NASDAQ: DOOO) and Arctic Cat Inc. (“Arctic Cat”), a Textron Inc. (NYSE:TXT) company, have reached a global settlement of the ongoing intellectual property disputes between them.

Under the terms of the confidential settlement agreement, the two court cases still active between the parties in the US and in Canada will be dismissed.

Among the matters resolved is the dispute related to BRP’s rider-forward patents and Arctic Cat’s full-size snowmobiles with pyramidal frame designs.

As a result, Arctic Cat and its Canadian dealers will be allowed to immediately resume the sale and delivery of its full lineup of snowmobiles in Canada.

Arctic Cat and BRP have pledged to continue to work together for the betterment and expansion of the snowmobile industry for all riders and associations.

About Arctic Cat – The Arctic Cat brand is iconic in the powersports industry, with nearly 60 years of designing and manufacturing leading snowmobiles, side-by-sides and ATVs that are renowned the world over for their power and performance. Arctic Cat snowmobiles, side-by-sides, ATVs and affiliated products are designed and manufactured in Thief River Falls, Minn. by Arctic Cat Inc., a Textron Inc. (NYSE: TXT) company that operates as part of Textron’s Specialized Vehicles business.

For more information, visit: arcticcat.com.

WHAT IS ARCTIC CAT UP TO?

0

Talking to Arctic Cat owners recently is like looking into the eyes of a human question mark!

There’s absolutely no doubt there’s a lot of love for the brand – and that attitude is completely justified.

Cat has been dealing out winners lately and sleds like the Mountain Cat line and the RIOT Series have proven to be way more than just competitive. The newest 800 2-stroke using Semi-Direct Injection is both clean and surprisingly powerful. The 4-stroke 9000 series is… well… pretty darn incredible!

Then there’s the Blast line-up. Cat has covered some serious bases here with both pricing and enough variations to cover a lot of the gaps in the marketplace.

It looks like the company is on a roll – at least with what it’s offering product-wise.

Suddenly, there’s a weird decision in a lawsuit that stifles Cat from selling the majority of its sleds in Canada. Arctic Cat had already been to US court on this and had gotten an “all-clear” on selling there. You’ve no doubt read all about it – especially if you happen to be an Arctic Cat buff.

So where does the company go from here?

We think Arctic Cat has had a new chassis design in the works for several years. It doesn’t take a rocket scientist to figure out the company could see the writing on the wall that its spar design (for lack of a better term, pyramidal design) was under legal attack from the competition and in fact had been undergoing court challenges for a considerable time.

Knowing how snowmobile engineers react, we’re absolutely positive there have been numerous Cat prototypes being tested without the spar design, likely since the middle of the previous decade.

Is it possible to build a decent snowmobile chassis without using pyramidal structure? Just ask yourself if the Polaris Indy works as good as a Ski-Doo G4. Most who have ridden both, feel it works better.

From a handling perspective, Polaris snowmobiles have been the leader for several years – and that doesn’t just mean better than Ski-Doo; it also means Cat.

The fact is, the pyramidal design may not be the ultimate way to design a snowmobile platform. Not sure about that, but it’s worth considering – and the Polaris design seems to be proving it.

What we’re saying is this: Here’s an excellent opportunity for Cat to introduce a new way to build a snowmobile. Knowing many of Cat’s engineers personally, I’ll guarantee they aren’t just throwing up their arms in frustration and saying it can’t be done!

The fact is, it likely already has been done – and the company’s marketing department has simply been waiting for the right time to introduce a new and more legally acceptable Arctic Cat platform.

That timing may have been moved forward but you can be sure those chassis geniuses in Thief River Falls have been on it a long time!

5-STAR SLEDDING IN CHARLEVOIX

0

Rarely does a specific hotel earn universal recognition as a must-visit snowmobiling destination – a place that draws trail riders like a magnet because it’s so remarkable, so unique, and so memorable.

Among this elite handful, the Fairmont Le Manoir Richelieu is second to none.

My Kind of Place

I well remember my first visit to Le Manoir Richelieu by snowmobile. We cruised along a tabletop Local Trail 124 until we glimpsed the St. Lawrence. But our surroundings remained as wild and remote as if we were still riding Charlevoix’s backcountry highlands.

Then without warning, we rounded a corner and were astonished to see a massive castle-like structure ahead, dominating the cliff ahead. This is my lasting, larger-than life impression of Le Manoir Richelieu, the world class hotel that’s become a very special home-away-from-home for many snowmobilers.

Where It’s At

The Fairmont Le Manoir Richelieu is located in the heart of Charlevoix, a region equally impressive for its abundant snow, superb trails and long-lasting winters. What’s more, eons ago a gigantic meteor-strike gave Charlevoix mountainous terrain whose panoramic views are the perfect backdrop for this stunning hotel.

The best way to get to the Fairmont Le Manoir Richelieu is by snowmobile. Trans Quebec Trail 3 parallels the St. Lawrence and runs the length of the Charlevoix Region. As the halfway point, La Malbaie is surrounded by local trails that combine with Regional Trail 378 to make several good day loops for staging from this remarkable hotel.

Meanwhile, the regions of Saguenay (to the north) and Quebec (to the southwest) offer extended riding opportunities connected to Charlevoix. So visiting snowmobilers have the option of basing out of Le Manoir Richelieu for multiple day rides, or stopping there overnight on a saddlebag tour. But don’t short-change yourself…

Great Facilities

I’d highly recommend at least a two-night stay for the full Manoir Richelieu experience – you simply can’t take it all in during a single night! Amenities include a heated outdoor saltwater pool and hot tub, plus indoor pool, hot tub and sauna, and Moment Spa. Additionally, there’s gourmet dining in several restaurants, ice skating, snowshoeing, acres of property to explore and, connected by a tunnel, the Casino de Charlevoix. And don’t forget the snowmobile rentals, direct trail access to heated and secure indoor sled parking! And, although there’s no on site fuel, a gas station on Local Trail 64 at nearby Clermont is handy to all the rides we did.

Charlevoix Trail Riding

Best of all, our 4-night stay at Fairmont Le Manoir Richelieu included three primo Charlevoix day rides, each different, but all on incredibly easy-going trails. We planned each of these itineraries to get us back to Le Manoir Richelieu early enough each day to indulge fully in its decadent pleasures.

Day Ride One

One counter-clockwise ride headed southwest to Baie-Saint-Paul for lunch and fuel. This is about a 200-km loop, travelling Trans Quebec Trail 3 outbound and Regional Trail 378 inbound. It includes several panoramic views riding through the hills above Baie-Saint-Paul down towards the St. Lawrence River.

Day Ride Two

Next, we swung north on a 260-km clockwise loop to L’Anse-Saint-Jean for lunch and fuel, then east along the Saguenay Fiord to Baie-Sainte-Catherine and back to La Malbaie. On this ride, Trans Quebec Trail 83 running north from Trans Quebec 3 is without a doubt one of the best sections of trail in Quebec. Plus, don’t miss the Mont À Pein lookout along the way. Meanwhile, Regional Trail 383 travels parallel to the Saguenay through some steep hills and valleys. Just east of L’Anse-Saint-Jean, a couple of local trails head north a short distance for views overlooking the fiord.

Day Ride Three

On the final day of our stay, we explored virtually every local trail surrounding La Malbaie for about 120 kilometres of riding. This trip included lookouts at Montagne de la Croix de Clermont, Mont Therèse-Casgrain and Promontoir du Lac Gravel. We topped up at Saint-Fidèle on Local Trail 34, and for this shorter ride, we took snacks for lunch so as not to spoil our appetites for our dinner feast back at the hotel.

Lasting Memories

They say a picture’s worth a thousand words. No doubt those included here speak volumes about what makes Charlevoix a special place, and why the Fairmont Le Manoir Richelieu has become its own snowmobiling destination.

As the hotel’s mission statement, posted in the lobby says: “We always endeavour to turn fleeting moments into lasting memories.” So for those in search of the ultimate snowmobiling destination, I’d say to the region and the resort: “Mission accomplished.”

Where We Stayed

* Hotel Fairmont Le Manoir Richelieu, La Malbaie

More Information

* Snowmobile Quebec

* Tourism Charlevoix (region trail map)

* Quebec Snowmobile Federation (permits, interactive trail map)