Home Blog Page 191

ARCTIC CAT’S NEW LIGHTER 4-STROKE

0

Arctic Cat has been making noises it wants to compete more in markets where small 4-strokes rule.

This is primarily the utility market and if you look at what Polaris has done the last two years with its very successful utility-targeted Indy line-up you can see how much potential there is. However, there’s also a decent market for lower-cost entry-level trail-focused iron with short-tracks and conservative weight.

True, since Polaris doesn’t offer any 4-stroke engines in its snowmobiles, nearly all those utility and entry-level Polarii are powered by the company’s fan-cooled 550cc 2-stroke.

Meanwhile, Ski-Doo sells a ton of utility sleds powered by its 600cc ACE twin. That small-displacement 4-stroke’s selling points are ease-of-use, fuel economy and rock-solid reliability. Interestingly, consumers are willing to pay considerably more for those benefits.

So where does this leave Arctic Cat? The company’s Lynx 2000 series, using the elderly Twin Spar platform is a stop-gap answer to this market but probably isn’t the kind of sled Cat would like to invest zillions into basing a bunch of new models on in the above categories going forward. Weight and manufacturing complexity are definitely issues and a successful offering here would pretty much need to be a fresh sheet of paper.

It seems pretty clear an entry level trail model would need to have a lighter 120-inch skidframe and track, the utility sleds a 141 or 144-incher. Cat already has good technology with its Sliding Front Arm suspension and its super-light XF skidframe. Both would certainly be adaptable to a new chassis.

Cat could bypass a lot of start-up and tooling costs by just building a simplified version of the ProCross using a shorter 120-inch version with a lightweight, small displacement Yamaha mill under the hood.

If you’re thinking the current Phazer 500 4-stroke, it probably wouldn’t be a choice for a low cost substitute because it’s extreme performance level (80-hp from a 500cc twin) makes it a very pricey engine to build and would make the concept of a cheap 4-stroke difficult to deliver on.

To our knowledge, Yamaha doesn’t have a lower cost substitute engine on its menu right now. We’d be willing to bet both Cat and Yamaha are working on one, though.

Vintage Snowmobiling At Its Finest

0

It started off with one of the SnowTrax crew grabbing an old heap, then the passion spread like wildfire.

Pretty much everyone on staff was ridin’ vintage iron by the end of the season and Leaf Spring Bangers World Wide was born.

Join the Bangers at Facebook/leafspringbangers and subscribe to our YouTube Channel!

Get Your Tips Up!

Yamaha’s Direct Injection 2-Stroke

0

It’s been over a decade since Yamaha promised it was getting out of the 2-stroke snowmobile business and by MY 2004 nearly every sled it built featured 4-stroke power.

It’s been an unprecedented undertaking considering the higher manufacturing costs and the weight penalty 4-strokes carry – particularly in an era when snowmobile weight has been front and center with consumers.

This year, Yamaha has opened doors into markets it has not held much court in for the last ten years. Case in point: The company is offering a pretty cool mountain Viper this year with 153 or 162-inch track choices.

The 162-incher is the one we think has the potential to convert a few 4-stroke-doubting mountaineers over to Yamaha turf and we’re anxious to see if it will be a sell-out success for the company.

All indications are it’s doing well and just as the marketing team felt, there is in fact, a group of altitude riders who find the prospect of a vertical 4-stroke appealing.

It doesn’t hurt that Yamaha has made a really good turbocharger add-on kit available and hasn’t reneged on its OEM warranty if you do the upgrade.

Here’s where our speculation-meter starts to warm up. What if the new Mountain Viper does really well and Yamaha sees potential for bigger things in the vertical biz?

You probably already know Yamaha owns patented super-clean direct injection 2-stroke technology and has offered it in its marine division.

It’s no secret the cost to get a sophisticated 2-stroke mill EPA approved, tooled and down the assembly lines is much less involved and expensive than doing the same with a high performing 4-stroke.

We think, despite the fact it runs counter to what identity Yamaha has gained with 4-strokes, there’s real potential for this to happen.

Building a Yamaha-reliable DI 2-stroke would put the company right in the wheelhouse of its competitors and it would mean its future high performance sleds could compete head-to-head for weight, handling and floatation in markets it has vacated because of its 4-stroke-only mantra.

Hey, never forget this: To a snowmobile manufacturer, it’s all about making money. The way for Yamaha to make money is to compete in ALL markets.

OFSC Offers Savings on 2015 Trail Permits

0

Following the resounding success of its pre-November 1st online sales campaign, the not-for-profit Ontario Federation of Snowmobile Clubs (OFSC) invites Ontarians to experience exceptional fun, camaraderie and adventure by purchasing a Snowmobile Trail Permit for a special pre-December 1 fee.

2015 Snowmobile Trail Permits continue to be available online, but for the first time this season, are now also available directly from the OFSC’s community based snowmobile clubs and their volunteers or from club designated retail outlets across the province. There are two permit types available until December 1:

Seasonal Permit – Seasonal Permits are available online or from club retail outlets on or before December 1 for $210 – a saving of $50 off the regular permit fee of $260. Snowmobilers purchasing online will not be charged a processing fee.

Classic Permit – Any snowmobiler owning a sled that is model year 1999 or older is entitled to buy a 2015 Classic Permit. Primarily available online for $140 on or before December 1, a Classic Permit offers a saving of $30 off the regular fee of $170.

Classic Permits are also available on a limited basis through OFSC district offices or their designated outlet. Snowmobilers purchasing online will not be charged a processing fee.

Both the Seasonal and Classic Permit allow access to available OFSC trails anywhere in Ontario for the entire winter.

OFSC member clubs operate over 30,000 kilometres of snowmobile trails throughout Ontario that rely on the revenue from the sale of permits to pay trail operational costs.

These trails generate almost $1.7 billion of winter tourism economic impact annually, while enabling family riders from all walks of life to enjoy winter outdoors by visiting many places and sights only accessible by snowmobile.

OFSC trails are marked, mapped and maintained for the use and enjoyment of permit holders. Ontario law requires snowmobiles entering an OFSC trail for recreational sledding to display a valid permit.

The Ontario Federation of Snowmobile Clubs is a volunteer led not-for-profit association, which through strong leadership, provides a wide range of quality programs and services to, and on behalf of, its member organizations. Our provincial network of organized snowmobile trails connects Ontario communities providing responsible riding experiences that are safe, enjoyable and environmentally sustainable.

For more information on 2015 Snowmobile Trail Permits visit www.ofsc.on.ca.

A 900 ACE TURBO JUST MAKES SENSE

0

Have you ever looked under the hood of a Ski-Doo XS with a 900 ACE? Surprisingly, there’s a ridiculous amount of room for either a) a bigger 4-stroke or b) a turbocharger and all its plumbing.

Here’s where it gets interesting. If Ski-Doo is in fact serious about getting into the ulta-high performance 4-stroke turf owned currently by Arctic Cat (177-hp-Turbo) or even offering a 160-hp 4-stroke, why would it invest in the costly tooling to start over again with an all new engine?

Let’s look at some turbo-history. Years ago Polaris began offering a 750cc Weber 4-stroke twin with a turbo. This engine made a reliable 140-hp with an “overboost” feature that took it to 160-hp for a few seconds when the turbo first cut in.

This extremely strong performing mill was a Supertrax favorite and the level of torque delivered by this combo was legendary. Fun to drive? You bet!

Even before this, Arctic Cat offered a 110-hp turbo package using a tiny 660cc Suzuki triple. It was all packaged in the original ZR sit-down platform and although it lacked a lot of sophistication, was a great sled that inspired a ton of enthusiasm. We still see these sleds on the trails today and some of them have enormous odometer readings.

What we’re saying is this: If you can get the kind of reliable power we’ve already seen in the industry from much smaller displacement 4-strokes, why wouldn’t a 900cc ACE triple make the same kind of power in the ranges we mentioned above?

Ski-Doo already has the weight thing dialed-in with one of the lightest platforms in the business. A torque-laden 160-170-hp turbocharged 900 would be killer in the XS.

Sure, we know Ski-Doo has not offered a supercharged or turbocharged engine in the past. Get this, though: Parent company, BRP, just introduced a turbocharged V-twin in its off-road Maverick side by side. BRP’s Sea-Doo division has been building durable supercharged engines for years now.

We think a 900 ACE with a turbo is a real possibility and Ski-Doo could get it on the market at warp speed.

Pleasant Riders Snowmobile Club

0

Pleasant Riders Snowmobile Club is much more than just a snowmobile club. The love of snowmobiling brings people together and when that occurs great things happen!

Pleasant Riders Snowmobile Club serves the Southern Adirondacks area of Speculator, Lake Pleasant and Piseco, but its members are not limited exclusively to this area. Membership numbers are well over 500, from all over the state and beyond.

The club is homored to receive recognition from NYSSA as the Club of the Year 2014. All clubs strive to achieve this award and this particular club has done it again – an honor first bestowed in 2008.

The club has grown leaps and bounds since 2008 and is now officially a 501c3 charitable organization. You can donate, donate, donate and write it all off come tax time!

Pleasant Riders Snowmobile Club applied and received a grant to purchase a new drag, which required many, many volunteer hours. The members worked closely with DEC to ensure the proper paperwork and procedures were taken to widen and repair our trails.

Beginning with the Fourth of July festivities, members get dressed up and decorate a float for the parade.They organize a clean up crew for the Adopt a Highway program and cook burgers and hot dogs and frying fries for the crowds at AppleFest.

Each year Pleasant Riders Snowmobile Club raffle a new snowmobile beginning in September into February and celebrate the end of another great season with an awesome fireworks display, a Christmas tree burning and then the winner is announced!

A great fundraising event is the Riding for The Cure Snowmobile ride. All proceeds from this event goes to the Local Chapter of the American Cancer Society. Riders set out on guided tours around the area stopping for lunch and returning to Oak Mountain Ski Area for a buffet dinner, raffle, silent auction and a 50/50 draw. The 2014 event raised over $12,000!

At Christmas Santa, Mrs. Claus and their Elves host the local children for a evening of caroling through town. After joy is spread throughout, the Elves prepare for a live auction with goods donated to the Club.

The most rewarding event of the year is the Toys for Local Tots Toy Drive. Toys are collected for all ages of boys and girls, the doors of the local VFW chapter and parents are invited in who may need a little extra help.

Pleasant Riders Snowmobile Club truly enjoys serving its community and volunteering time to ensure the best trail system. If you’re already a member, you may have seen the improvements the club has made and is making. If you’re unfamiliar with Pleasant Riders Snowmobile Club, visit Facebook/Pleasant-Riders-Snowmobile-Club to find out more.

New Sharpening Tool from BITEHARDER

0

Less than three years after Welch Manufacturing Technologies announced the release of the snowmobile industries first diamond coated carbide runner sharpening tool, owner Glenn Welch and the team at BITEHARDER have done it again with the release of their newest product, the BITEHARDER Carbide Stud Sharpening Tool.

Building on the incredible success of their carbide runner sharpening tools, the patent pending BITEHARDER stud sharpener is a simple and effective way to sharpen your studs without the need to remove them from your track.

“The stud sharpener is one of our Professional Series Tools,” says Welch, “meaning it needs to run in a pneumatic style die grinder at speeds of 10,000 RPM or greater to obtain the best results.” Welch continues noting a Standard Series Portable version is in the works.

As with their other tools, industrial diamonds on the inside face of the tool are used to perform the sharpening process. CNC machined from the highest quality steels to precise tolerances the BITEHARDER Carbide Stud Sharpening Tool also provides a universal shank for mounting to any high speed pneumatic grinder. The BITEHARDER brand is leading, yet again, with another MADE IN THE USA tool for the Snowmobile Industry enthusiasts to embrace.

The tool is designed to sharpen the carbide stud without changing the overall height of the worn stud. Each tool is rated to sharpen 500 or more studs and takes only about 15 seconds of grinding per stud to bring back a sharp tip, allowing you to sharpen all the studs on your track in under an hour.

For the 2014/2015 snowmobile season, the BITEHARDER Stud Sharpening Tool will only be available directly from BITEHARDER and retails for $149.95.

For more information about BITEHARDER’s Carbide Runner Sharpening Tools, and the NEW BITEHARDER Stud Sharpening Tool, including video demonstrations, visit www.BITEHARDER.com.

Ram and Hibbert Look to Return to Winning Ways

0

For the 2014-15 AMSOIL Championship Snocross season, Ram Truck will return as the official truck of defending series champion Tucker Hibbert’s snocross team with an eye toward a title repeat.

Hibbert claimed the 2013-14 ISOC Pro Open Championship – his eighth national title – winning 15 of 17 Pro Open finals. It was his most successful among the 14 professional-class seasons he’s completed.

For the coming season, Hibbert’s team will add the Ram truck brand to its name and compete under the Monster Energy/Arctic Cat/Ram Truck banner.

“Tucker Hibbert is the kind of ambassador any sport would dream of,” said Bob Hegbloom, President and CEO – Ram Truck Brand, Chrysler Group LLC. “The fact that he’s out there with his Ram truck pulling his sleds over North America’s most demanding roads and through the most extreme weather conditions is a reflection of the real-life expectations Ram owners have of their trucks.”

In January 2014, Hibbert also became the most winning racer in the history of snocross, and – with 95 wins under his belt – is expected to claim his 100th pro national victory this season.

Hibbert also competed in the 2014 Winter X Games, becoming the first winter athlete to win seven consecutive gold medals. With 12 medals overall, the Pelican Rapids, Minn., native is tied with snowboarder Kelly Clark for the most X Games medals in one discipline. Hibbert became the X Games youngest gold medalist at age 15.

Ram will also support Hibbert in his bid to earn his ninth Winter X Games gold.

“When the snocross season kicks off, our Monster Energy/Arctic Cat/Ram Truck team will be focused on racing – we don’t have time to worry about our trucks,” said Hibbert. “Our Ram trucks are reliable, capable and take us race to race through some of the snowiest parts of the country. Snocross fans are loyal, and they recognize that Ram is here, helping power their sport.”

Ram Truck also returns as Official Truck and presenting sponsor of the ISOC series, known as AMSOIL Championship Snocross, powered by Ram.

According to the series, 83.7 percent of AMSOIL Championship Snocross’ audience owns pickup trucks.

“When the weather turns cold, Ram Truck owners don’t hunker down indoors, they’re outdoors working, playing and getting things done,” added Ram’s Hegbloom. “Snowmobiles and pickup trucks go together hand in glove. When you look out over the ISOC parking lots, you see our customers and their trucks for as far as your eyes can see. Whether you need Ram’s 28-mpg best-in-class fuel efficiency or unmatched 30,000 pounds of towing, our trucks are out-performing the competition and exceeding our customers’ needs.”

For the second consecutive year, Ram is also title sponsor of the Feb. 27 and 28 Soaring Eagle’s Ram Trucks National, held at the Soaring Eagle Casino and Resort in Mt. Pleasant, Mich.

Last month, ISOC Officials announced a multi-year television agreement with CBS Sports Network.

The new television package kicks off on Sunday, Dec. 7, on CBS with a one-hour season-preview show that will include an in-depth Tucker Hibbert feature. Ram trucks will also be highlighted in the CBS preview. In total, beginning with AMSOIL Championship Snocross’ season-opening round at Spirit Mountain in Duluth, Minn., and running through the season finale in Lake Geneva, Wis., CBS Sports Network will air 17 one-hour ACS race programs.

2015 RAS 2 CORRECTION

0

We’ve recently published information on this website and in Supertrax magazine that is inaccurate concerning the availability of the new RAS 2 front end being available for certain XR-Series Ski-Doo’s this season.

The good news is it was actually you, our readers and viewers who pointed out the error and we have to commend you for your scrutiny of the articles we write. We’re prepared to eat crow.

We’ve checked and verified the following info right from corporate Ski-Doo and want to set the record straight.

We had stated that across the board, the 1170 4-TEC production Ski-Doos using the XR platform would not be receiving the RAS 2 front end for 2015. This was both right and wrong: 2015 X-Series and TNT versions of the MX-Z XR do in fact come delivered from the factory with RAS 2. Same goes with Renegade X’s and Adrenaline XR models with the big 4-stroke.

However, the following XR-series models do not come with RAS 2: The GSX SE, Grand Touring nor does the XS Freeride.

When it comes to the RAS 2 factory update kits recently made available from Ski-Doo, they are only available for XS and XP Ski-Doos with 2-stroke engines.

At this date there is no RAS 2 kit specifically calibrated for XR models. Ski-Doo is still testing these upgrade kits for the 4-TEC 4-stroke XRs and there are no factory authorized kits for XRs on the shelves for sale – yet.

Apparently the issue has to do with spring calibration dealing with the extra 60 or so pounds of 4-stroke weight over the skis. Some of our readers have told us you merely buy the kit and use your stock coil-over springs instead of the ones in the kit with the new front-end parts. Ski-Doo made it clear to us this was not a factory authorized method and did not endorse it.

There you have it. We apologize for any inconvenience or confusion this may have caused. No excuses, we screwed up!

THE NEXT BIG 4-STROKE

0

We’ve been wondering what’s going on in the industry with extreme performance 4-strokes.

Right now, the only 4-strokes registering over 130-hp are Yamaha’s long-established Apex (162-hp) and Cat’s 9000 Turbo.

The naturally aspirated Apex is really in a category of its own and riders who own one are absolutely enamored with it. That sweet 998cc four is an incredible engine and has a longstanding reputation for reliability.

The problem with the Apex is twofold. First, it’s getting long-in-the-tooth. It’s approaching its tenth year of production and the Apex platform was really a more rider-forward modification of the original RX-1, first seen in 2003. That’s a long time for original technology – especially in the sno-mo-biz.

Second, although the sled is built mostly from aluminum, it is very heavy compared to sleds that have been introduced the last five years. Yamaha knows this but by the time the Apex was pared down in weight to a more competitive level, the company might as well just start with a clean sheet of paper.

Another factor is the relationship Yamaha has with Arctic Cat. Cat hangs its high performance 4-stroke reputation on turbocharging, Yamaha’s calling card is precision-instrument, naturally aspirated 4-strokes.

We think a completely new joint venture sled is under testing right now. We presume it will be based on a Cat platform and (hopefully) will use the 998cc Apex engine.

Then there’s Ski-Doo. BRP is way overdue to introduce a hopped up 4-TEC. Right now, at 130-hp, this 1170cc mill is a rocket, generating impressive top end. However, it has a few glaring faults, particularly throttle lag and Ski-Doo already has the fully developed cure for the problem (wireless 900ACE).

We think Ski-Doo is poised for a revamp of its big-inch 4-stroke program and any new 4-TECs will offer power in the 150-hp range, targeted at the high performance market and perhaps, even the mountains. The existing engine will remain in more civilized Ski-Doo 4-strokes like the GS and Touring.

If this is true, it’s easy to see why Yamaha is under pressure to bring a new Apex to the market.