Home Blog Page 164

SKI-DOO’S NEXT 600 E-TEC

0

Now that Ski-Doo has dropped its G4 850 onto the snowmobile world, it looks like the next thing to ask is: “What about the 600-class?”

It only makes sense Ski-Doo intends to make the G4 REV its next exclusive platform for all of its models. This means its 600cc sleds will adopt the G4 fingerprint too. There’s more to it than meets the eye, though.

A close examination of the G4 reveals its 850 E-TEC is a uniquely designed engine with extremely narrow cases so it can be mounted in the center of the belly pan. When we say center, we mean side-to-side, not just fore-and-aft.

The idea was to allow the sled to be built as narrow as possible for off-trail freestyle ventures into deep powder and for mountain applications. Narrowness is good in these environments because it allows the sled to be much more maneuverable when laying the sled on its side in deep snow when pivoting and also to reduce drag from the bodywork (paneling) in deep snow.

Back to our 600cc theory: First, if Ski-Doo even comes with a 600 again (it could be a 650 and cause a re-write on all the rules in this class) it will likely be a completely new 600 E-TEC with many of the durability features offered on the 850 (steel ring lands for the pistons and exclusive crank oiling, including a throttle body oil injection site) and narrower dimensions using the 850’s stator.

This means a new set of blueprints and the opportunity to really go one-up on the competition.

THE NEW VIPER

0

This is pure speculation but we’re wondering what Yamaha has in mind for the 2018 Viper.

There are a couple of factors that are playing into our theory for a big revamp of the Viper.

First, the current Cat-based Viper is in its third year and wasn’t changed much last year. Second, the Vector underwent some big changes last year, but is still being overshadowed by the Viper. Third, the Vector has some new technology, like the SingleShot skidframe and electronic throttle control (YCCT) the Viper doesn’t have.

When we put it all together we could see a new Viper with electronic throttle control, the new SideWinder roller secondary clutch and the new Yamaha-designed SingleShot skid.

We’re thinking elements of the new SideWinder bodywork might even show up on the Viper.

These changes would separate the Viper much more from its Arctic Cat counterparts and give it the Yamaha distinctiveness the company seeks.

Changes like this would likely give Yamaha much more incentive to deep-six the Vector – a move Yamaha hardcores would no doubt lament, but one that is probably necessary given the huge selection of Viper models offered.

WHAT WILL POLARIS DO WITH THE INDY?

0

A question you’ve been asking is what we think Polaris will do with the 121-inch Indy.

Frankly, we love the current Indy but know Polaris needs to inject some enthusiasm into that particular model, and soon.

As it is, the Indy has been demoted to a 600cc bargain sled in the brochures and it’s not because it isn’t a good snowmobile – it’s just a bit outdated compared to the other available performance Polarii built on the newer AXYS platform.

Our thinking takes us to current sleds now being offered on the AXYS-Indy platform – the in-tunnel 2017 Switchback 144 and Voyageur 144. We think the next Indy will definitely be built with a similar AXYS front clip but with a 121-inch track.

Will there be a return to an 800? Dunno, but we do know that a 121-inch 800HO AXYS-Indy would be way, way fast! It might be faster than an AXYS RUSH and we don’t think that’s the result Polaris wants.

If it remains a 600 with the new AXYS 600, we’re okay with that, too, but think Polaris might be missing out on something really good with an 800 Indy.

Another thought we’ve had is increasing the RUSH with Pro XC external shock to a baseline 129-inch track length (like the competition) and keeping the Indy as the company’s high value 121-inch product. This would be a win-win for snowmobilers and allow Polaris to cover more bases in the performance category.

Essentially Polaris could dump the in-tunnel Indy altogether and just rename a slightly trimmed down 120-inch RUSH the Indy.

5 REASONS YOU SHOULD BUY A 2-STROKE SLED

0

WEIGHT:

Probably the single biggest attraction with a 2-stroke is its ability to generate plenty of power from a lightweight power source.

Most 2-strokes make similar power to 4-strokes nearly twice their displacement and using several times more parts.

COLD WEATHER STARTING:

Historically, 2-strokes, particularly those equipped with EFI, have been sure bets to start in extreme low temperatures. This is not always the case with 4-stroke sleds.

SIMPLICITY-COST EQUATION:

There are far less parts in a 2-stroke engine than in a 4-stroke. Although maintenance may be required at a younger age, the parts and labor cost to do a renewal is far less than on a 4-stroke when major work is required.

FUEL MILEAGE:

Unbelievably, fuel consumption on the newest generation 2-strokes is the same and often slightly better than on comparable output 4-strokes.

LOWER PURCHASE PRICE:

2-strokes generally cost several percentage points less than a 4-stroke with comparable power.

5 REASONS YOU SHOULD BUY A 4-STROKE SLED

0

TORQUE:

Depending on its displacement, a 4-stroke’s power curve tends to favor higher torque output at primary clutch engagement RPM.

Some of this is affected by the fact most 4-strokes use more displacement to get the same horsepower.

For instance: A 600cc Polaris 2-stroke and a Cat-Suzuki 1,056cc 4-stroke make around 125-hp, however, there’s a big difference in torque between the two, particularly in the lower RPM ranges.

LONGEVITY:

It’s a fact that 4-stroke snowmobile engines live a longer life before there’s major maintenance needed. Meanwhile 2-strokes will inevitably need a top-end rebuild once the miles get into the teens.

NO CARRYING OIL:

Since a 4-stroke is not consuming its oil the way a 2-stroke does, you don’t have to carry any when you’re on a long trip or spend extra riding time looking for a place to buy more oil to top up.

ELECTRIC START AND REVERSE INCLUDED:

Going back over the last 14 years, you’ll be hard pressed to find any 4-stroke sled that doesn’t have both ES and reverse. Not so with 2-strokes.

RESALE:

Although the initial cost of a 4-stroke may be higher, you generally get the money back and more when you go to sell a used 4-stroke sled in good condition.

FCMQ and Woody’s collaboration

0

Snowmobile safety is a primary and constant preoccupation for the Fédération des clubs de motoneigistes du Québec (Quebec federation of snowmobile clubs, or FCMQ).

This is precisely the reason behind the FCMQ’s decision to ally itself with International Engineering & Manufacturing Inc., better known by its trade name Woody’s, for the launching of a new safety campaign geared to promoting and encouraging stud use on snowmobile tracks.

Based on the theme “Snowmobile safety… get a grip!”, the campaign espouses the virtues of these safety enhancement devices which have been proven in numerous studies and whose use is endorsed by industry experts. Offering unrivaled traction in icy and low-grip conditions, stud use is a reliable and sure safety investment for all snowmobilers, notably in a world in which trail conditions are increasingly icy and unpredictable.

“With trail conditions becoming increasingly variable, stud use is an important and significant contributor to the safety and well-being of trail riding snowmobilers”, notes Stéphane Desroches, FCMQ General Manager. Tanya King, Marketing Manager at Woody’s, the world’s foremost producer of studs and runners for snowmobiles, adds that “we are proud to be able to contribute our expertise in this important field and collaborate towards the increased safety and well-being of Quebec’s snowmobilers. Use of traction products, including carbide runners, improves stability and balance, helping to make for a safer and more enjoyable snowmobiling experience.”

The campaign will be featured in various FCMQ communications vehicles throughout the 2016-2017 season, including the provincial trail map, the Services guide and Motoneige Québec magazine.

About the FCMQ – The Fédération des clubs de motoneigistes du Québec, a sectorial tourism association, is a not-for-profit organisation that has been serving its members for more than 42 years. It is dedicated to the development and promotion of safe snowmobiling throughout Quebec. The FCMQ defends the interests of its 200 member clubs and their 90,000 individual members. More than 4,500 volunteers contribute in excess of 800,000 hours annually towards the maintenance of the provincial snowmobile trail network. Some 14,000 jobs are created thanks to snowmobiling, resulting in a level of annual economic activity totaling $3.27 billion, of which $1.9 billion is attributable to the activity itself with a further $1.37 billion coming from related manufacturing activity.

About Woody’s – International Engineering and Manufacturing Inc. (IEM), makers of Woody’s® traction products, is based in Hope, Michigan, USA and is known worldwide as the industry’s premier producer of snowmobile performance and safety traction products for skis and rubber tracks. IEM is family owned, currently on its second generation, and keeps up with the latest technology and equipment. Over 48 years, IEM has transformed from a part-time business to an international corporation. This expansion came from perseverance, hard work, innovation, an unwavering commitment to quality products and following through with excellent customer service. Commit to a life with Woody’s Traction Products because trust and reliability are the best foundation for any terrain..

YAMAHA’S NEW MID RANGE SLED

0

We recently commented in Supertrax about the shelf lives for certain Yamaha models approaching their stale dates. One particular target is the Phazer with its high-strung 500cc powerhouse and incredibly unique styling.

If you’ve ever had the opportunity to ride a 4-stroke Phazer, you know how much fun the sled is and how well it performs, particularly on trails.

It’s been around for quite a few years and, frankly, its price is pretty high compared to the competition’s mid or entry level 2-strokes. Sure, it is a 4-stroke but with sleds like Cat’s 4-stoke ZR5000 and Ski-Doo’s 900 ACE, from the showroom window it’s difficult to justify old technology versus new.

We think Yamaha may have a Phazer replacement in the works and we have a hunch what it might look like… It begins with a 129-inch ZR chassis using gas cell shocks and a 1-inch deep track. Power would come from the new 998cc triple used in the SideWinder, certainly naturally aspirated (no turbo) and using single throttle body EFI. Power would be detuned into the 95 to 100-horse range – just enough to one-up the ACE 900 (90-hp) and justify a price increase over the competition.

This power output would separate it nicely from the Viper and keep pricing lower than that sled but likely higher than the Phazer. Think we’re crazy? Maybe, but this engine-chassis combo with a number of cost-downs would be a big hit with the same type of customer who loves the ACE 900.

It’s tough to deny the ACE 900 has been a huge success for Ski-Doo and there are plenty of riders out there who like the idea of a 100-hp 4-stroke snowmobile.

TEST RIDE: M8000 SnoPro 153 Limited

0

SnowTrax Television Co-Host Luke Lester evaluates Arctic Cat’s 2016 M8000 Sno Pro 153 Limited.

Subscribe to our YouTube Channel!

ARCTIVA REGULATOR BASE LAYER

0

Arctiva introduces new Women’s Regulator Base Layering

Keep It Close To The Skin. Do the lady in your life a favor this Christmas, give her the gift of WARMTH!

The most effective way to keep warm on the trails is to start with the right base layers. Recently introduced by Arctiva is the new Women’s Mid-Weight Regulator. Built with a comfortable polyester/spandex blend provides 4-way stretch for range of movement and comfort. Get both the shirt and pant for a mere $30.00 per piece! Available in sizes XS thru 2XL.

ARCTIVA produces a complete line of apparel for the snow enthusiast.

For more information visit us at arctiva.com.

SURE GRIP DOLLIES INNOVATION

0

2016 marks yet another advancement for the Sure Grip system as the company introduces a redesigned, detachable forward security cable.

Available as an option when ordering, the new feature accommodates Ski-Doo snowmobiles with Pilot TS adjustable skis. The added height of the adjustment knob is easily accommodated with the detachable security cable that clips back in place once the ski is positioned on the dolly.

Sure Grip dollies are designed to accommodate virtually all makes and models of snowmobiles along with today’s leading aftermarket ski designs. Standard Sure Grip Dollies can also be adjusted for skis up to 7-1/4-inches wide and for the extra wide mountain skis measuring up to 10-inches in width the mega-wide dollies are available.

Sure Grip Dollies continues to be the top choice of snowmobile enthusiasts for moving their sled on hard and uneven surfaces. Those who want to protect their carbides, keep driveway and garage surfaces gouge free and also protect their back from heavy lifting all agree that Sure Grip answers their needs best!

– Sure Grip dollies are also used by the US Marine Corps in California to access the snow line for winter mountain warfare training camps.
– Sure Grips have proven useful for DNR officers in state and national park services to access trail systems for patrol and rescue when snow cover is marginal.
– They have also been found to be an ideal tool for use in the fall to assist the driver portion of various youth snowmobile safety-training programs.

Sure Grip Dollies are 100% made in America and are constructed of solid plate steel, utilizing proven SURE GRIP Premium grade 5-inch solid rubber wheels mounted on graphite bearings. For a non-running sled, a swivel track dolly is included, the only question that remains is: What challenges do you have for the SURER GRIPS?

See them in action at suregripdolly.com or call 320-252-0278.