Home Blog Page 64

2021 Yamaha SRViper LT-X GT Review

0

Luke evaluates Yamaha’s 2021 SRVIPER LT-X GT featuring the stellar 1049cc 4-stroke triple, spinning a belt-friendly YXRC clutch combo, Fox QS3 shocks and Yamaha’s new Stryke skis and tweaked spindles.

Subscribe to our YouTube Channel!

2021 SKI-DOO MX-Z X 850

0

We have two 850 E-TECs in our fleet this year – one a Renegade and the other an MX-Z. Both are very well equipped and have given us a well-rounded opinion on their performance and ride-ability.

First, the MX-Z. This one is an “X” version and when we first rode it we were saying to ourselves: “This 29-inch version is great and I actually prefer it over the 137-inch Renegade!”

The shorter track allows snappier handling with slightly quicker turning (than the Renegade) and the sled just feels lighter. We know, it is lighter but that sensation is clearly delivered to the rider.

No complaints with the power here on either sled. This Direct Injected 850 starts instantaneously, doesn’t smoke and runs flawlessly – no matter what the temperature or humidity. Power feels pretty endless whether you’re accelerating from corner to corner or just taping the flipper to the bars out on a frozen lake.

This version of both the 137 and the 129-inch length rMotion performs admirably. There was no time when we were surprised by an invisible square-edger or pothole in the trail for one of those “oh-no” moments. The skid just sucks it up and asks for more. Great technology!

The big deal here, and the truly new tech on this sled is its front end handling change. Ski-Doo’s newest “RAS X” front end offers a wider-by-1.8-inches ski-stance, new upper and lower A-arms and new spindles. However, you could be misled into thinking the handling change is just all about the front end. It isn’t.

Ski-Doo has completely changed the rMotion (now called rMotion X) out back to work in compliance with the RAS X front end. There’s a new 13mm longer front arm and where the front arm mounts to the skid rail there’s a cam adjuster (Ski-Doo calls this the “Weight Transfer Adjuster”. It’s designed to vary the amount of transfer the sled has on acceleration by changing the leverage of the front arm. The rear arm is also a few mms longer – and Ski-Doo claims the whole unit is about 5-lbs lighter.

Apparently, this year the goal of Ski-Doo’s engineers was to make the Ski-Doo chassis corner flatter. There had been complaints about ski-lift and non-linear responses up to the apex of corners with the old RAS 3 setup.

The new front end tech and the fairly major changes to the skid have resulted in a very flat, skis-planted-on-the-snow demeanor. As we mentioned, ride compliance hasn’t been compromised.

We noticed with both sleds, the front end does stay much better planted – even to the point of both skis pushing or understeering sometimes, depending on the type of snow you’re riding on (this was more pronounced on the Renegade). We got the best turning results on medium-loose snow using the adjustable skag Pilot X skis with the carbides dialled really deep. This, unfortunately, increased steering effort considerably.

Our sleds are equipped with Ski-Doo’s “panoramic” 6.8-inch digital display with a rotator knob located ahead of the rider’s left knee. Although the info was helpful, we found the operation of this setup to be lacking. Best to set it up thoroughly before you ride and not mess with it enroute unless you’re completely used to how it works.

One further comment: Both our Renny and MXZ have rear shock damping and spring adjusters mounted on the running boards. We have made good use of these and honestly, it’s one of the best options you can add to a Ski-Doo. It’s especially useful when different sized riders are piloting the sleds and you want to max out ride compliance.

We should also mention we haven’t found a great deal of difference in the ride, handling or performance of the X versus the X-RS. Yes, the XR-S has a slightly different range between full soft and full hard when you’re dialling in damping but because of the aforementioned tune-ability of the running board adjusters, you can get exactly the level of compliance you’re wanting.

The X has less front end adjustability, however, because of the difference between the X-RS’s premium front end and the X’s KYB gassers with no damping adjusters.

In conclusion, we have to say the X is a very nice package and although the X-RS offers a more sophisticated shock package, depending on how you ride, they’re both pretty close.

Indy EVO Stud and Carbide Installation

0

AJ adds some necessary traction productions from Woody’s to not only balance the handling of the Polaris EVO but also instil confidence and provide an additional layer of safety and control for the younger pilots of this popular sled.

Subscribe to our YouTube Channel!

Woody’s Traction Options for Crossover Sleds

0

Today’s factory options allow snowmobilers to have any number of tracks on 144 or 146-inch Crossover sleds, so what’s the right choice for studs? Well, it really comes down to overall balanced traction.

This means the happy balance is not too much bite up front with your carbides, making it heavy-steering and awkward, and likewise not too much studded or paddled grip out back causing the sled to push in the corners. The key is finding the harmony between those two things.

Woody’s Traction is always innovating and designing new and helpful products, from their multi patterned stud guides to track drills marking tools and even shallow sockets and easy to hold round head Allen-keys for installing studs.

Woody’s Grand Master or Grand Master Pro studs work great on Cobra track options with 1.3 or 1.6 inch lugs. They are designed to be used in single ply tracks, and the GM Pro is now available with a much more pronounced sharpened carbide tip for even better traction. You can buy Woodys stud kits with the nuts and backers all in one package or customize the backer shape and color to match your ride or accent it accordingly.

If you have another track option and have opted for studs you’re going to need to make sure you proportion the grip you’re getting up front so you don’t mess up your sled’s handling and cause it to push too much.

To accomplish this, check out Woody’s Ace carbides because they feature a unique host bar design that are excellent help in keeping your long track, deep lug or studded 50/50 sled tracking where you want it to go without becoming too heavy up front.

Visit woodystraction.com to see all of Woody’s products.

MBRP Exhaust Race Teams

0

Luke pays a visit to the test grounds of MBRP sponsored snocross teams, St. Onge and Blackriver Racing. While on the ground he gets a first hand look at the development of their race sleds and gains new found level respect for MBRP’s Race Inspired – Trail Proven design philosophy.

Subscribe to our YouTube Channel!

2021 Polaris Switchback Assault 144

0

Few new snowmobile models have dominated any class in the past five years like the Polaris AXYS Switchback Assault. What’s remarkable about this accomplishment is how many really good sleds there are in this segment.

Even though there are competitive differences that allow for picking winners in SNOWTRAX comparos and shootouts, there’s one sled that has continued to stand at the front of the X-Over class year after year.

Yes, my snow obsessed friends, Polaris has been slaying the rabidly popular X-Over class steadily with the AXYS-based Switchback Assault in either 600 or 850cc flavors. So successful at doing dual duty is the Assault, Polaris elected to continue production of the AXYS-based ride in MY 2021, in the face of the all-new MATRYX based Assault 146.

So maybe you’re wondering why and how the 144 Assault continues to capture the approval of the highly selective SnowTrax and Supertrax crew? FYI, we have both a 144 AXYS Assault 850 and a 146 MATRYX Assault 650 at World HQ this winter.

Here’s the simplest way of explaining why, in the face of formidable competition, including the excellent Ski-Doo BackCountry X-RS and Arctic Cat’s RIOT, the Polaris Assault continues to be our pick for best sled in this class. It’s not about doing one thing well; it’s about doing two things well and minimizing compromises. We’ll explain.

This class is not solely a deep snow, freeriding segment – although the expectation of buyers in this segment is they definitely will be riding off-trail.

Okay, we’re not going to posit a diatribe on the wrongness of off-trail riding. For the sake of this report we’ll assume everyone who rides a X-Over sled only goes off-trail where it’s 100 percent copasetic. Back to the sleds…

Clearly the Switchback Assault 144 850 is a capable boondocker/freerider. The sled, when equipped with a 2-inch Camo-shredder (our favorite shoe for this ride) is exceptionally potent and can, in some situations, run with full-on shorter tracked mountain rides. However, the Assault is not targeted at the vert crowd – it’s positioned precisely as a deep snow flatland and groomed trail ride.

Here’s my point: The Assault always pleases when taken off-trail, however, the G4 based Backcountry XRS Ski-Doo with 850 power is just as capable – arguably more capable – than the Assault off-trail.

So if we just admitted that reality, why do we think the Switchback Assault is the ultimate X-over ride? Simple again. The Assault is a really good trail sled with its IGX uncoupled skid, variable castor IFS and light weight.

Did we mention the Assault’s dual purpose ergonomics? You can ride this sled all day on trails and not feel the least bit strained by excessive body roll, understeer, unrepentant skid-frame ride quality or a too-tall bar riser.

This is where Polaris makes hay with the AXYS Switchback Assault. It’s really good off trail and its really good on trail. Being better at one of these two riding disciplines isn’t what its about.

The class is called Crossover – and that quite simply means a sled of this designation should be able to cross over between two riding disciplines – a dozen times a day if necessary, delivering top performance in both riding genres.

So there you have it: The Polaris Switchback Assault 850 144 is still the king of this hill.

2021 Polaris Indy 850 MATRYX VR1 Review

0

Luke evaluates the 2021 Polaris Indy VR1 featuring the 850 Patriot engine.

Subscribe to our YouTube Channel!

Summit X Turbo vs PRO RMK Horsepower Clarification

0

Follow up to comments made in our 2021 Ski-Doo Summit X 850 Turbo vs 2021 Polaris Pro RMK 850 shootout regarding the horsepower of the 850 turbo engine in relation to its weight and its output at certain altitudes.

Subscribe to our YouTube Channel!

CALIBER SLED & TRAX WHEELS

0

There are a lot of companies out there who make products to assist in the transport of your sleds and one of those companies is Caliber.

Caliber makes everything from shop dolly wheels to sled ramps and even hard mounted trailer ski and track guides to assist in getting you out on the snow with less hassle.

When you start out in the morning or likewise finish up in the evening a lot of us who ride like to leave our sled in the shop to thaw out, but that can have its own set of problems.

Using Caliber sled wheels as well as Caliber Trax wheels allows us to move the sled around the shop with ease.

The ski dollies work with nearly all sled skis and actually lock onto your wheel so you can drive it up to 12 MPH. When you link this up with the rear Trax wheel set up, which will accommodate up to a 3.25-inch lug, you no longer have to struggle to move your sled around the shop thanks to the 5-inch oversized casters and a 500 LB load rating.

An additional benefit of the new Trax wheels – because it’s a tapered base it means if you hit a rough spot on the concrete, rubber or even a piece of gravel on the shop floor it won’t cause the dolly to fall off the track like so many others do.

For more information on Caliber’s full line of products visit caliberproductsinc.com

DRAG RACE: 600R ETEC vs 650 Patriot

0

It was a cold, sunny day, the lake was frozen hard and since we had the two sleds along with us we wanted to put them through their paces.

The question had long been looming about which of the two was fastest. And if one was, which one and by how much?

We decided to evaluate based on out-of-the hole acceleration, mid-range pull-away and top speed.

After a couple of tries, we quickly concluded we couldn’t get a fair appraisal from either sled by trying to take off from a dead start. There just wasn’t enough traction on our particular lake – there had been recent snowfall, and although long stretches were nicely tramped down and by all appearances pretty hard, there was still too much track spin to get a fair comparison. We decided to do 20 mph roll-ons and allow the sleds to work where they could get the most grip.

ATTEMPT 1:

We lined the sleds up beside each other about 20-feet apart and feathered the throttles until we reached the magic 20. One rider did a 3-count, dropping their arm to signal it was go-time. The throttles on both sleds were mashed pretty much simultaneously and the 650 VR1 pulled ahead almost a sled length and then kept building its lead by inches.

When the two got into the midrange, the Polaris shot ahead significantly. Its lead extended by at least a couple of lengths and as the two sleds approached 85-mph, the Polaris was clearly ahead and continuing to pull away.

ATTEMPT 2:

Same routine and the same result but this time the Ski-Doo driver got a jump on the start. The Renegade pulled ahead about a sled length and then the VR1 took over. Somewhere between 35 and 40 mph its larger displacement shot the 650 past the 600R decidedly. No looking back as the Polaris continued to stretch its legs and finger-walk its lead until both riders backed out of the throttle at about 90.

ATTEMPT 3:

Same again. This time the sleds left very evenly but the Polaris was still ahead at the end of our run. The Polaris rider commented that when he nailed the throttle each time, even though he was seated far forward and hugging the tank with his knees, the sled transferred so hard it pulled a throttle wheelie, keeping the skis off the snow about 6-inches for over 100-feet.

CONCLUSION:

The results speak for themselves and although the sleds were super-close, the races ended the same – every time. The statement we have to make is this: Why wouldn’t the results end up like they did? The mathematics don’t lie. This square bore and stroke Polaris has a lot of torque plus the benefit of larger displacement. It should win and should be faster than the 600. Just makes sense.