Home Blog Page 448

Weight Watching

Will the OEM’s allow us to wet weigh their 2006 sleds in Utah this March? Read Supertrax to learn how Yamaha invited us to wet weigh their 2005 sleds at Hay Days and then ask yourself – If you were an OEM observing Yamaha’s weight reduction progress would you want the public to think you were unwilling to back up your claims of lighter 4-stroke weight?

This whole issue is intriguing to us and here’s why: It was Yamaha who first refused Supertrax to weigh the all-new 2003 RX-1 in March 2002 at the new sled evaluations out West. Since that time, Yamaha has realized it’s impossible to quantify any progress in weight reduction unless there’s a benchmark to work from.

In other words, how can you make buyers believe your sleds are getting lighter if you never show them where you started? This rationale has no doubt contributed to the eyebrow raising results collected by our certified digital scales at Hay Days.

2004 Woody’s Challenge

press release — Wayne Legge of Mindemoya, ON made the long haul from Manitoulin Island to crush the competition in the 2004 Woody’s Challenge held in Birch Run, MI October 17, 2004. Legge waded through a field of 16 of the fastest Pro Stock 1000 drag sleds in North America to lay claim to the single biggest paycheck in snowmobile drag racing, the $5000 winner-take-all Woody’s Challenge.

The Woody’s Challenge is a special “shoot-out” style drag race, with the field being narrowed down to the “Sweet 16” finalist. These finalists are then paired off through a drawing, and run two at a time with the winner advancing to the next round and the loser going back to the trailer.

Once the final pairing is determined, these two racers square off with the winner taking home the $5000 prize from Woody’s, which is the single biggest pay out in snowmobile drag racing.

REV 550F High Performance Kits

Here’s interesting news for individuals looking for a relatively low cost way to have some racing fun.

Ski-Doo will be releasing kits to modify the new REV 550 Fan for legal stock snocross racing.

At this writing Ski-Doo will offer two ISR legal kits for the sled.
Kit one includes piggy back front shocks, an aluminum center shock, a C-46 rear arm shock, new (stiffer) springs all the way around, 4 idler rear axle, legal snow flap, jetting, primary clutch weights, spring and all necessary hardware to bolt the sled together.

Kit Two will include a hood mounted windshield, hooker handlebars, riser, throttle perch (aluminum), grips, heaters, hand guards and hardware. Hmm, sounds like the stuff you need to convert a regular REV into an X-package, doesn’t it? Naw, just a coincidence.

Ski-Doo Race Marketing and Communications guy Steve Cowing suggests aspiring 550 pilots should consider a 1.25 track as well.

Fusion Updates

If you Snow Checked an IQ Fusion Polaris this spring here’s some info you’ll want to read. Engine air intake has been updated from the protos we rode in McCall, Idaho.

Air is now drawn from behind the windshield instead of the front of the hood in an effort to reduce snow ingestion. Peak power is now claimed to be 150 HP or 11% more than the current Liberty 800.

More significant is the 23% gain in HP at 6,000 RPM when compared to the 800. As well, peak torque is 13% greater than the XC 800.

Electric start as a dealer installed option will be available this winter. All 121 inch Fusions will come standard with a RipSaw 1.25 inch lug track at no extra charge to early order customers.

While all Fusions have tunnel top tunnel protectors as a result of the 1.25 track, a rear cooler protector kit (part # 2874687) will be necessary for traction product use.

Fuel mileage in late season testing has been averaging 14 mpg at aggressive trail speeds. Polaris claims the proto Fusion 900’s we tested weighed 524 pounds (dry).

Their goal is to deliver production Fusions at a claimed 499 pounds (dry). We did not weigh any sleds in McCall this spring as a result of new guidelines for the annual Snow Shoot event. Polaris indicates 499 pounds is the current dry weight of the 800 XC SP.

Tour Buddy Tanks for Fan Cooled REVs

0

Tour Buddy is always expanding the list of sleds which their innovative auxiliary fuel systems fit. This fall, for the first time in Tour Buddy history, fan cooled sled owners will have the convenience and security of extra fuel capacity on the 2005 Ski-Doo REV 550 and REV 380.

Due to the rear mounting of the REV Tour Buddy, there’s no issues with underhood packaging or cooling. These two new fan coolers use the same chassis as liquid cooled REV models.

This means the slick and aero-appearing REV Tour Buddy will fit in the rear tunnel extension ahead of the taillight.

With the REV platform using fan cooled engines and the slick looking fitment of the REV Tour Buddy Auxiliary Fuel System, fan cooled riders can go the distance this winter.

Contact: 1-888-244-1112 or go to www.tourbuddy.com.

SHOF Announcement

The board of directors of the SNOWMOBILE HALL OF FAME (SHOF), is happy to announce that AAEN PERFORMANCE PRODUCTS of Racine, Wisconsin, will be the title sponsor of the RIDE WITH THE CHAMPS to be held on Thursday, January 13, 2005.

The prestigious celebrity ride and fund raiser for the Hall of Fame is in its 22 year. Riders begin with 7:30 am registration at the Eagle River Inn in Eagle River, Wisconsin. Following breakfast and the group photo, guides lead four groups of 25 riders each for the daylong trail ride in the Wisconsin Northwoods.

Lunch is at Bosacki’s Boathouse in Minocqua and then the riders return to Eagle River for the 6:00 pm autograph session followed by the banquet and induction ceremonies for the 2005 Hall of Fame inductees.

One of the four groups will be vintage and antique sleds. The “old timers” are a big part of the historical aspect of the sport and is a very fast growing part of snowmobiling. The $100 fee includes breakfast, lunch and the Hall of Fame induction dinner.

Simmons and BRP in Court

The makers of the Simmon’s Flexi-Ski have had BRP in court arguing the dual runner, concave Ski-Doo Precision Ski is infringing on a patent owned by Simmons for their “Flexi-Ski”.

In a recent release, BRP’s case was slowed by a US District Court Judge who dismissed BRP’s defense of “obviousness”. Without belaboring the point, this issue is likely far from over. Stay tuned.

BRP Sells Groomer Division

0

For those snowmobilers interested in trail grooming equipment, this will come as a surprise. BRP’s (Bombardier) Industrial Division – makers of the legendary “Ski-Dozer”, “Muskeg” and “BR” series of snow grooming and high flotation tracked vehicles was sold in early August to Camoplast Inc. This is the same Camoplast who supplies every snowmobile OEM with tracks.

Not coincidentally, Camoplast was actually a Bombardier owned company (Camoplast Rockland) and went on their own in the 1980s. BRP’s President,Jose Boisjoli, has made it clear the focus of BRP in the future will be recreational products.

Also, this move should provide the new BRP with a substantial cash injection, useful to power up future initiatives. No word on whether the former Industrial Division product lines will become “Camoplasts” at this writing.

Off-Shore Outboards Socked with Tariffs

0

Here’s a strange twist which has no immediate implications in the snowmobile industry but is sure to rock the outboard engine business to its very roots.

In early August the United States Department of Commerce ruled Japanese outboard manufacturers have been “dumping” outboard engines into the US marketplace. Essentially the term “dumping” relates to the price variance between what an importer would sell their domestically manufactured products in their home market to the price they charge for the same product in the US.

As a result of this ruling all Japanese outboard engine manufacturers will have a duty charge of 22.52% applied to engines and powerheads imported into the US. The ruling was effective immediately.

News From Finnair Cargo Ltd. In Canada

0

Northern Europe Inc. has been appointed as the General Sales and Service Agent for Finnair Cargo Ltd. in Canada. Tommi Korhonen, Managing Director of Northern Europe Inc., will be Chief Operating Officer, while Henry Korhonen has been appointed as Manager, Cargo Division.

Although Finnair operates direct flights in the summer season from Toronto to Helsinki and points beyond, a substantial volume of cargo is sent to and from Finland via John F. Kennedy Airport in New York. A daily road ‘feeder’ service to and from Montreal and Toronto to JFK Airport connects the cargo with Finnair MD-11 service to Helsinki, and Finnair freighter service twice a week to Gothenburg, Sweden.

Northern Europe Inc. is North America’s first and only marketing company that promotes the travel and tourism interests of Scandinavia and the Baltic countries to those living in Canada and the United States.