Home Blog Page 304

ARCTIVA COMP 4 GLOVES

0

Gloves are an essential component of your snowmobile gear and how good a pair of gloves are can make or break your day of riding.

Arctiva makes a sweet pair of gloves that match its Comp 4 series of outerwear. These fully insulated and waterproof, all-weather paws keep your digits toasty while also allowing you to retain mobility and sensitivity to switch gear while riding thanks to the rolled fingertip pattern.

When you slide your hand into the comp 4 glove, you’ll immediately notice its form fit feels almost like it was made specifically for you right from the factory. The durable diamond PVC palm provides the right grip and the nylon chassis is waterproof coated to keep moisture out so your hands stay dry from whatever nature can throw at you.

The Comp 4 glove also features a waterproof and breathable Hipora membrane liner, plus an integrated backhand vent and heat pad pocket so you can slip a hot pack right into your glove for additional warmth in extremely low temperatures.

This glove is available in 6 different color options. Pair it with your Comp 4 jacket and bib for the perfect combination.

Visit www.arctiva.com for more.

Power to Make Your Jaw Drop

0

MBRP has just released a new can for the Arctic Cat Z1 Turbo that will totally redefine what you expect from your sled.

First MBRP shaved off seventeen pounds compared to stock. Then, thanks to hours of prototyping and extensive testing engineers were able to add ten additional horsepower to what was already a pretty respectable machine.

Wrap that all up in a polished stainless steel body and give it the classic MBRP growl and you have performance beyond your wildest dreams.

Find out more about MBRP’s performance exhaust products and off road accessories at www.mbrp.com or call toll free at (888) 636-7223.

About MBRP Inc: MBRP, the leading performance exhaust manufacturer for snowmobile and diesel light trucks, also manufactures the fastest growing line-up of performance exhaust systems and accessories for Ford, Dodge, Chevy/GMC, Toyota, Nissan and Jeep, as well as applications for select luxury vehicles, new-model muscle cars, sport compacts, and motorcycles.

Team Byers Take the Podium in Kirkland Lake

Last weekend the Supertrax / Steadymate / Byers Motorsports team made the long haul up to Kirkland Lake.

The weather there was a little warmer than the usual -20*C and wind that we are used to when racing there. Track conditions were also different than other years as it was crystal like and did not hold up as good.

Kyle took to the track in Saturday’s Sport 600 starting off the weekend with a 3rd place finish in moto 1. Kyle didn’t get the best of starts in Moto 2 placing him near the back in corner 1.

He was very fast going through the rhythm section where he made up most of his positions for a 2nd place finish. Kyle started from row for the final and got a great start putting him up front. He was running 2nd and fell back to 4th but held on and kept the pressure on 3rd.

The 3rd place rider came off his sled on the last lap giving Kyle the position finishing 3rd at the checkered flag.

Sundays track conditions changed as the track was firmer and faster in the morning. In moto 1, Kyle nailed the holeshot putting him out front.

Unfortunately his lead did not last too long as he blew a berm on the first lap. He got back onto the track at the back and had passed a couple riders but came off the sled in the rhythm section finishing 9th. In Moto 2, Kyle got tangled up with another rider on the 2nd lap and finished 9th.

Having 2 tough races, Kyle didn’t make Sunday’s final. Jamie started off with the weekend with the Semi-Pro Open class. In Moto 1, Jamie didn’t get the best of starts and came out the first corner in last. He was able to pass some riders on the inside of the second corner and picked some good lines to get him up to 3rd for the finish.

Jamie struggled with the track in moto 2 finding it hard to discover some good lines through the rhythm section finishing 4th. Qualifying front row for the final, he lined up right on the inside and nailed the start getting him upfront.

Jamie was running 2nd after the first lap before hitting a bump in the rhythm section tossing him off the track. He was able to get back on the track only losing a few positions. Charging hard after coming off the track he was able to battle his way up to 3rd for a close finish right behind 2nd place.

Jamie did not race in Sundays Semi-Pro Stock class as he headed out to West Yellowstone, Montana with the Supertrax Media crew to ride the 2011 sleds. He would really like to thank Mark and AJ for giving him this opportunity.

This year, riders are able to throw out one Regional race and this will be the race for the Stock class therefore this will not affect his points. The next CSRA event is scheduled for March 27-28 at Chicopee Ski Resort in Kitchener. Let’s hope the snow stays around on the hill.

Thanks to our Great Sponsors: Supertrax Magazine, Steadymate Tie downs, Byers Motorsports- Polaris, Gamma Sales, Amsoil, Creechers Design, Woody’s, Fly Racing, CM Sports, Dayco, Powermadd, TekVest, Sled Pro Photos credit Dwayne Young, CMSports.com

Longevity of Direct Injection Engines

Question:

Dear Motorhead,

I’ve been a SUPERTRAX reader for 16 years now, and your magazine is the BEST. Thank-you!

My question is regarding modern 2-stroke longevity. I’m aware that in order to produce less emissions, more HP and better fuel mileage, leaner fuel mixtures and hotter running temps are required.

This makes me question the longevity of these engines compared to the 2-strokes of old, which ran much richer and ran at least 6000-7000 miles without any required maintenance (top-end rebuilds, etc.) DI and CFI engines are relatively new, and my next purchase will be 2-stroke powered.

Do we have reason for concern?

Adam

Response:

Thanks for your email!

You are right in your assumption DI 2-strokes run hotter. However, current Rotax E-Tec mills (600 and 800) both use liquid cooled crankcases – something not required with carbs as fuel was actually doubling as coolant.

Combustion temps are up however current DI E-TECs have very sophisticated piston coatings to disperse heat. CFI and SDI engines are not that much hotter running than carbed models. It’s really DI which is taking 2 strokes to new limits.

So, will these engines last? According to the info we received just last week at Snow Shoot in West Yellowstone, Montana, Ski-Doo claims we can expect at least 10 to 15 K miles out of E-TEC engines without any reliability problems.

To make this a little more understandable look at the record of reliability the current crop of Evinrude E-TEC mills have earned.

DI’s can use way, way less injection oil because they do not wash oil out of the crankcases – with fuel entering the combustion cycle at 15 degrees before TDC after the exhaust port is closed there is almost no opportunity for fuel to wash down cylinder walls, rings and certainly not the bottom end where only air is being scavenged.

Time will tell for sure but I don’t think you should fear DI 2-strokes. Remember this – even 4 strokes can break and what type of motor would you much rather pay to fix?

Motorhead Mark

IQ Touring Suspension Set-Up

Question:

Dear Motorhead,

I bought a new 2010 polaris 600 IQ Touring and it really pushes in the corners. I tightened up the front suspension and that helped quite a bit but it still does not turn the greatest.

Would I be better off tightening the front strap and loosening the front suspension?

Also when I ride 1-up the suspension is a little stiff and I weigh 220 lbs. with my daughter on the back it rides like a cadillac.

I’ll accept any tips on setting up the suspension.

Thanks,

Jerry

Response:

Thanks for your email!

Here’s my suggestion based on considerable exposure to this sled. Put your limiter back to its original position, leave the front IFS preload alone and get some Slim Jims or Dooly runners.

Run your rear torsion springs in full soft until you feel persistent (not occasional) bottoming. Then bump them up one level at a time. This sled is not known for push or understeer traits unless you have Polaris dual runner skis and are riding in wet, heavy snow.

Slim Jims will bring the front end bite back you lack under all conditions.

Thanks,

Motorhead Mark

F5 Handling

Question:

Dear Motorhead,

I am a huge fan of Supertrax. I am currently 14 years old and I had some handling Questions about my 2007 Arctic Cat F5.

I weigh 90 pounds so i don’t have much influence on the sled. I lean as much as i can but it still won’t corner as i would like. So I was hoping you could give me some suspension advice for handling.

Thanks,

Alex

Response:

Thanks for your email.

Your 2001 F-5 is known for profound understeer (push) when ridden by an average size rider. You are way below average in weight so your F-5 will be reluctant to turn – at best.

Pull the front limiter strap in one hole at a time to increase ski pressure. If you were a little heavier I would suggest bumping front IFS spring preload up but at 90 pounds this will only make the ride intolerable.

In as much as this will increase steering effort I really think you need to increase your carbide bite by using something like a Woody’s Slim Jim or Dually, Stud Boy Shaper or Deuce Bar or the very effective Snowtracker ski enhancer.

Pulling in the front arm reduces the effect of the sliding front arm feature and will make the sled less-plush in the jigglers – but you really need to do this.

Hope this helps!

Motorhead Mark

REVELSTOKE TRAGEDY: Enough Is Enough

0

I’m tiring of stupidity. I’m tired of fighting the same battles over and over again. I’m tired of the government legislating common sense in the absence of common sense.

This past weekend’s tragedy in Revelstoke, British Columbia, is the last straw. It could be argued this tragic accident was not an accident at all. It was an unavoidable consequence of actions taken by irresponsible people. Sadly their actions cost innocent lives.

It’s time for everyone in the sport of snowmobiling to get serious about common sense safety and I mean everyone – not just the flatland trail riders who have cleaned up their act by beating down impaired operation and enforcing helmet use across North America.

It’s time now for those who ride vertical to think safety and heed warnings. This isn’t the Wild West. Mountain riders are not gunfighters. Risks must be reduced and avoided whenever possible, not embraced and romanticized.

The tragic avalanche that ensued as a result of riders highmarking in a location repeatedly warned as being highly unsafe and ready to slide leaves me almost speechless. I said, almost.

The fact some 200 snowmobilers positioned themselves in the way of a potential slide seems suspect. However, the fact riders who were highmarking with these people, casually enjoying lunch below them in harm’s way, is beyond belief.

Here’s what bugs me most: As snowmobile enthusiasts, everything we do rises and falls on the tide of every other snowmobiler’s behavior. I like to think we’re winning this battle and raising the threshold with impaired riding awareness and the resultant reduction in impaired fatalities. We won the helmet battle years ago. I really do believe our collective efforts toward safety have gained ground the past few years.

Then the media hoards latch onto this incredibly preventable, ridiculous situation that cost two people their lives. Our reputation as a family oriented, safe, motorized recreation took a huge hit this week.

The Revelstoke disaster is an indefensible situation. No one in the enthusiast press can stand up and defend what happened. This was born out of an incredible disregard for common sense and a complete absence of clear thinking.

What’s next? As I watched national news coverage of the situation in BC I heard the Solicitor General commenting that lawmakers in BC have already been looking at ways to legislate backcountry mountain riding. Great.

Random, infrequent but tragic events like this past weekend’s avalanche will serve to empower the government to restrict our sport. The biggest problem is this: The government will get broad based support for legislative intervention as a result of the careless nature of the Revelstoke incident.

The risks taken by rescue teams, not to mention the huge cost to respond to this mess will only empower the government to stick its nose further into our sport. The sad part is that in this case, it’s hard to disagree with the politicians.

At this point in time I almost think the government needs to legislate this behavior. I said almost. This has got to be the last straw, the final act of irresponsibility, the last time mountain riders do something this careless, this foolish.

If those who love to ride vertical don’t soon get into the mainstream on issues of safety and responsibility, they will lose access, lose the mountains and lose any vestige of credibility and respect.

Don’t think that can happen? It can and it will.

2010 Yamaha Apex Review

0

Motorhead Mark shares his thoughts on Yamaha’s 2010 Apex.

E-TEC Technology Uncovered

0

Luke Lester talks all about E-TEC Technology- how it works, and the benefits it provides.

Check out SnowTrax Television’s YouTube page for more Test Rides at YouTube.com/SnowTrax.

Visit www.snowtraxtv.com to watch full episodes of SnowTrax Television online!

Red Hot Pro-R

Besides the changes you just read about, the RUSH gets a new 8-pound lighter silencer for the 800 and the entire package is tightened up both visually and literally in almost every detail. The only disappointment we saw was the same notchy, recalcitrant hot grip switchgear and the continuation of non-heated hookers.

The RUSH gauge package incorporates myriad features easily toggled from the left handlebar rocker switch. There is a 3-minute record feature built into the main gauge so clutch tuners or top speed lake honers can gather data on the performance of the sled.

The Dragon is gone for 2011 and the new Polaris hot rod handle is called “Pro-R”. Order up a RUSH Pro R with either 600 or 800 engine choices and you get Walker Evans piggybacks with 16-clicks of compression damping adjustability.

A 2.5 pound saving in both weight and rotating mass comes from a rifle drilled jackshaft and a lightweight brake rotor. RUSH brakes use stainless steel lines and the rotor is located outside the chaincase in clean air. There’s a duct feeding air onto the rotor as well.

Sweet graphics (the best look being the retro TX package that’s quite frankly, horny) are available for Snow Check buyers only. Otherwise the colors for the Pro-R Polaris Rush models are red for the 800 and gloss white for the 600.

Polaris isn’t leaving the high mileage, all day cruiser crowd out of the RUSH mix, either. The former 136-inch IQ based 600 LX goes to the RUSH platform and comes standard with the stuff LX is synonymous with.

Keep in mind, this sled uses a 120 x 1-inch lugger out back. E-start, a power port, an RCA port, high windshield, mirrors and saddlebags are standard. We thing this is going to be a very desirable sled in MY11 with the inherent benefits of the industry’s most advanced and only true rising rate rear suspension targeted directly at the most discerning and suspension sensitive riders.

Read all about the 2011 Polaris sleds