Home Blog Page 416

Yamaha’s R&D Nytro Race Sled Exposed

Press Release –

Boss Racing’s Defending Champion, Robbie Malinoski, and Yuji Nakazawa make their Yamaha debut on the WPSA Power Sports Snowmobile Tour at the Amsoil Duluth National this weekend.

The pair is taking Yamaha’s 4-Stroke Challenge to the race track by campaigning R&D Nytro race sleds in this year’s Pro Open class. The program is the first of its kind in snocross.

“With rumors running rampant about what these two champion racers might be driving this season, we thought we’d do something else unprecedented,” explained Yamaha Race Manager Greg Marier. “We’re going to throw the doors open before race day and tell fans what they can expect to see on the snow at Spirit Mountain.”

First glance at the R&D Nytro race sled will tell fans that this is truly a developmental sled, not a finished and polished machine. The chassis is built to allow the development team to change suspension mounting locations and geometry.

The ergonomics are fully adjustable, giving the drivers the opportunity to provide their feedback on what the ideal should be. Engine mount location has moved around, as the team is field-testing the best location for balance and handling.

Malinoski is excited to get the season started. “I know that the whole year is geared toward R&D, but I’m coming into each race at least to earn a podium finish. The sled has a lot of power already, and we’re not even through first race yet.”

Going into the first race, this is what the R&D Nytro race sled will have onboard. The engine is a Nytro-based, 3-cylinder 973cc 4-stroke powerplant, according to the ISR racing rules.

The front suspension, bulkhead, and side panels are a derivative of the Phazer design. The rear suspension uses a developmental torsion spring design. Current sled weight is equal or less than other mod sleds on the track.

“I am confident we’re going to win some races this winter and really change people’s minds about Yamaha’s 4-stroke sleds,” said Boss Racing Owner Garry Querel. We have seen some amazing technology from Yamaha so far and I am confident that we will meet any challenges head-on and bring home wins on race day!”

Best-Selling Snowmobile Book Back In Print

SUPERTRAX’ own CJ Ramstad’s illustrated history – Legend, Arctic Cat’s First Four Decades – is back in print after its fourth printing this past summer.

The best-selling snowmobile book of all time, it’s the compelling story in words and pictures of the red Arctic Cats of the 1960s, the Black Panther and Sno-Pro EXTs that defined the 1970s, the trials of the market collapse of the early 1980s and the triumphant emergence of a pioneer returning to dominance once again with the new Panthers, Wildcats and ZRs of the 1980s and 90s.

This colorful book tells the tale of the ever-changing product, the engineering, the racing and all the details with a collection of photographs sure to spellbind any one interested in snowmobiling and its history.

Available now at bookstores, Arctic Cat dealers and through CJ’s photo website SNOWPOD.COM

Muskoka: Confidence Inspiring Cruising

0

By: Mark Lester

The incredibly posh northern offices of Supertrax International are located smack dab in the middle of some of Ontario’s best snowmobiling.

Last winter this editor’s self-guided tour originated from Supertrax headquarters, located just east of the Muskoka Region in Haliburton County. From here you can run miles and miles of 12 to 16-foot wide white top and enjoy some of the finest riding in North America.

My wife and I loaded up a pair of 4-strokes and pointed toward Muskoka’s Bracebridge, Ontario.

Our route included honing the MSR’s Tall Pines Snowmobile Club trails through the town of Dorset and a visit to the famous Oxtongue Shelter where we linked with the Algonquin Snowmobile Club’s trails, another MSR member.

From here we pointed our ski-tips toward Canada’s largest resort hotel, the Deerhurst Inn and stopped for an excellent lunch there.

Departing the Huntsville area we headed toward the town of Port Sydney on Mary Lake. Another mid-winter squall was dumping copious quantities of our favorite form of precipitation on Muskoka. At some points we actually had to sweep destination signs to verify our route.

After refueling in Port Sydney and encountering ever deepening snow, we had mixed emotions. We were enjoying the amazing trails groomed by the Muskoka Snow Bombers between Port Sydney and Bracebridge but knew every mile we rode drew us closer to our destination, the Riverside Inn in Bracebridge.

After enjoying a great dinner and overnight at the Riverside we loaded up and left the Riverside’s safe, secure snowmobile parking lot and headed toward Gravenhurst, then the town of Baysville on the beautiful Lake of Bays for lunch and a power ride home, sampling what we believe to be some of the finest lake running anywhere in the world.

Our two day trek produced better than 200 miles of riding and was handled in total comfort and confidence without a guide.

Call 1-800-328-7245 and visit SnowmobileInOntario.com for maps and more information.

Electric Wheels for your Sled

0

We recently attended a show in Laval Quebec and were introduced to a cool new concept for your snowmobile.

TJD Fabrications out of Riviere-du-Loup, Quebec has introduced an excellent way to limit the beating your carbides take as well as increasing the handling of your sled while crossing roads or hard-packed surfaces.

The SW Electric wheel system mounts to your skis and can be activated by flicking the switch located on the left handlebar of your snowmobile. Activation time is less than 8 seconds and then you can safely cross the road while confidently handling your sled.

The SW Electric is independently automated so you do not need to stop the snowmobile to activate it and handling over hard surfaces will increase dramatically as the wheels will grip the road and lift the skis from the ground.

For more information, visit TJD.ca and call 418-863-5885.

When Should a Drive System Be Serviced?

Question:

I have a 98 Pantera with 3600 miles on it. Is there any guideline as to when drive systems should be replaced? They aren’t worn out, but have been subjected to several winters’ use.

Jerry Brecke

Excelsior, MN

Response:

Regardless of the model year of your Scooter I suggest at 3,600 miles you should have the clutches removed, disassembled, cleaned and serviced.

I also highly recommend you drain the chain case and replace with fresh oil.

While your sled is approaching 10 years of age, with only 3,600 miles there should be lots of good miles left in the unit.

Good luck!

Motorhead Mark

TOP SECRET: Yamaha Race Sled Spy Photos

We had suspected the new Yamaha race sled would look more like a Phazer than the Vector based version Yamaha raced last year.

Our team came across these top secret spy photos of the Yamaha racer in action.

Supertrax Custom Install…Way Back

Question:

I saw on the internet that Supertrax installed a 600 triple in an S-chassis back around 1996?

Where can I find more info on this install? It sounds like fun!

Thanks,

Greg

Response:

Greg:

Where on earth did you find that story? Amazing! Yeah, we did a Supertrax project story about ten years ago where we bought an MX-Z series, I think it was a 500, and located a Formula III 600 triple for it (right from Ski-Doo’s Race shop).

This was in the days of big three holers and we had been wondering how the lightweight S-chassis (which we loved) would work with a Formula III engine in it.

Larry Wilson of Larry’s Small Engines in Orangeville, Ontario did the swap for us and although it was more than a bolt-in, it worked really well and the hood closed down over the motor, no problem.

One of the problems we ran into was the increased weight over the skis made the sled steer really hard, so we added a stiffer front spring in the skidframe (I think it was from a Formula III).

The hybrid turned out to be a nifty little lake racer and it was still way lighter than the F-3 plus we gained a big advantage in handling and ride.

I think it was soon after this Ski-Doo brought out a 600 MX-Z twin and it was way better (and faster) than our triple.

I’m not sure if I’ve got the story archived but I’ll look for it and post it for you, if possible.

Kent Lester

BVS2 Helmet Question

Question:

I am seriously looking at the BVS2 helmet and have heard mixed reviews on dootalk.com.

Have you done any testing on these and what are your thoughts that it is not SNELL approved? Should every helmet be SNELL approved or just DOT? Nobody in my group has one, so I can’t test it.

The trigger for the flip down visor looks like it may break easily. Any input would be appreciated.

Thanks, Jeff Moyer in Sellersville, PA.

Response

Thanks for your email! Helmets are items which are tied tightly to personal preference.

In the case of any full face helmet you should try one in real conditions first. The BVS2 is well liked by our staffers who use it. It has unequaled cold weather protection and visibility as a result of the anti-fogging system built-in.

Again, personal preference is a big factor here. Sorry I can’t be definitive – it’s the nature of helmets.

Motorhead Mark

Performance Parts for a 2004 Ski-Doo GSX 600 HO

Question:

I have a 2004 Ski-Doo GSX 600 HO and I need to know what I can do with it.

I have a Ski-Doo riser kit on it and it’s great. I want more power, but there aren’t a lot of parts for GSX 600’s. All of the aftermarket parts are for the MXZ’s and Mach-Z’s and other performance sleds.

What I was wondering was if a parts like an exhaust kit for a 2004 MXZ 600 HO would fit my GSX. If not that, any other sleds that have common aftermarket parts that would fit my GSX. Also, any other info about what I should do with my sled or where I should go for the parts would be greatly appreciated.

Thank you for your time and I will be anxiously awaiting your response.

Sincerely,

Steven Frangk

Response

Thanks for your question. First thing which comes to mind is this – If you own a Rev GSX and didn’t know it’s a mechanical twin to an MX-Z, you might want to go easy on engine mods.

Here’s the deal, you can bolt anything on a GSX Rev which will fit an MX-Z Rev. With the exception of some small suspension tweaks, the sleds are identical.

Be careful about adding an exhaust system. While there is more HP available with a good aftermarket exhaust, ask the company you buy from about recommended jetting and clutching tweaks.

If you do not perform both clutch and jetting mods you will not get all you paid for with an aftermarket exhaust.

Also, pay careful attention to the advertised sound level of any aftermarket exhaust mod. In many jurisdictions there are noise regulations imposed on snowmobiles.

It is possible to alter the sound your sled makes without exceeding these limits.

Motorhead Mark

CSRA Season Preview

0

By: Thayne Hallyburton

The 2006/2007 Canadian Snowcross Racing Association season is set to open up another campaign December 8-10 in Searchmont, Ontario at Searchmont resort.

Among the big news of the off-season was the downsizing, or folding of former powerhouse, Super teams. OTSFF Motorpsorts has downsized, keeping Peter Raymer to ride in the pro classes and bringing aboard Dustin Vandrie from the now defunct Armstrong Speedsports team to race Semi-pro. Armstrong Speedsports as just mentioned has not put a team together for 2006-2007.

Thomas Kenny will be racing with his brother, Ryan Kenney and father. Ryan will move up to the Pro Classes for this year, and has a good chance to contend for a championship.

Dustin Vandrie has moved to OTSFF, Carl Kuster has retired (not officially) and John O’Malley has moved on to pursue a career in snowcross in northern U.S.’s Rock Maple Racing snowcross circuit.

Supertrax racing has also quit snowcross. Brentwood Roofing has expanded its team, welcoming Mike Vandolder into the fold, along with Paul Wilson, who will be racing Semi-Pro.

Royal Distributing made the big splash this off-season, undergoing the most change. It will now feature both Polaris and Ski-Doo riders.

Iain Hayden has left to move onto the World Power Sports Association (WPSA) snocross with Blair Morgan Racing. In response, Royal Distributing went out and got the ‘Big Fish’ in Mike Island. Island will be riding Polaris’s with last year’s junior racer of the year, David Joanis who will be racing all Sport classes and Semi-Pro stock.

Joey Sagan will be back again under the Royal name, but he will be running out of his own trailer with his dad on Ski-Doo’s. Royal will undoubtedly have two top guns in the pro classes this year.

It appears as though Northland Recreation will also be cutting back its racing program, with confirmation that it will be helping out the Brand brothers, Jeff and Kevin, as well as Tiffany Saville.

Last year’s top notch class of juniors and sport riders will be trying their hand in the Semi-Pro ranks this season as well and will undoubtedly supply an ample amount of entertainment for the fans in attendance.

Jeff Brand, Travis Hallyburton, Tom Adams, Dave Joanis, Dustin Vandrie, Paul Wilson, Cody Watkinson among others have all announced plans to run full on semi-pro, or dabble in semi-pro stock.

CSRA has shortened its race schedule from years past, holding just 8 races and co-sanctioning one other with the WPSA in Valcourt Quebec, so getting off to a fast start will be the name of the game is you want to be on top of the podium at the end of the season.

Pro Top 3 to watch:
1) Mike Island
2) Peter Raymer
3) Joey Sagan

Semi-Pro Top 3 to watch:
1) Paul Wilson
2) Dustin Vandrie
3) Colt Pickles (if racing)

Hopefully the snow cooperates with us this year and everyone stays injury free. Good Luck to all the racers and crewmembers. Last year was awesome and this year there is more fun in store.

See you at the track!