Home Blog Page 373

Black Magic/Team Arctic Charity Red Lake 500

Thief River Falls, Minn. –The idea was originally pioneered by Jim Urquhart, who last season raced the USCC Red Lake 500 in the Fan 600 class and brought home first place while raising over $3,000. This Year Arctic Cat and Black Magic wanted to race that idea to an even larger payout for the (CMN) Childrens Miracle Network.

Jeff Gruhlke, 33 from Wyoming, MN is no stranger to snowmobiles and snowmobile racing having raced snocross for 5 years. New to Cross Country racing last season, Jeff competed in 4 events, finishing on the podium 3 times. Black Magic Powersports has inked Jeff to ride the Red Lake 500 on the all-new and revolutionary Arctic Cat 600 SP and both are looking forward to great finish.

Gruhlke is excited at the opportunity to return to Arctic Cat on a race sled fully prepped by Black Magic Powersports. “Black Magic has a strong reputation of great results and they bring great equipment to the race. Knowing I have an Arctic Cat that is prepared by Black Magic gives me confidence and I’m looking forward to a great finish for myself and the Childrens Miracle Network.”

“We want to win, and Jeff gives us an excellent chance. I rode with him last Saturday and spent some time with him at the shop, he’s just one of those guys who has a natural ability to go fast,” says Arne Rantanen Jr., vice president of Black Magic. “I thrilled to have Jeff ride for us and I really think he’s got a chance to win.”

The USCC Red Lake 500 will take place January 18-20 and is hosted by Seven Clans Casino in Thief River Falls, Minn. The USCC Red Lake 500 is considered one of the toughest events for both man and machine. For more information on Arctic Cat snowmobiles, please log on to www.arcticcat.com or visit your local Arctic Cat dealership. For more information about Black Magic Powersports, log on to www.blackmagicracing.com.

2009 Ski-Doo TNT E-TEC Information

BRP Press Release
January 14, 2008

As you know, BRP is the undisputed leader when it comes to state-of-the-art two-stroke snowmobile engines, with SDI and PowerT.E.K.TM technologies.

Today, we’re extending our lead with the introduction of the Rotax 600 H.O. E-TEC engine. It powers a special 2009 Ski-Doo® MX Z TNT sled, available now in limited quantities.

We pioneered E-TEC direct injection two-stroke technology in our Evinrude® outboard engines, where it won the Clean Air Technology Excellence Award from the US Environmental Protection Agency. This E-TEC system, developed specifically for snowmobiles, delivers several benefits:

Fuel Economy.
At 21 mpg US/25 mpg CDN, the 600 H.O. E-TEC uses 15% less fuel than the current Rotax 600 H.O. semi-direct injection (SDI) engine, 78% less fuel than the Polaris‡ 600 CFI and 92% less than the Arctic Cat‡ 600 EFI.1

Oil Economy.
Most owners will have to add oil just once per season2, due to the added precision of the system’s electronic oil pump and sophisticated computer mapping. The 600 H.O. E-TEC uses half the oil of the SDI and Polaris 600 CFI, and just a third the oil (66% less) of the Arctic Cat 600 EFI. 3

Emissions / smoke and smell.
The 600 H.O. E-TEC is the cleanest two-stroke snowmobile engine by a wide margin, meaning there’s virtually no smoke or smell.4

Lightweight.
Because of its two-stroke configuration, the 600 H.O. E-TEC is naturally lightweight for better handling and reducing rider fatigue. The MX Z TNT with 600 H.O. E-TEC model weighs just 415 pounds (188 kg).

Hassle-free ownership experience.
Engines with E-TEC technology start on the first pull every time; run with a super smooth idle and instant response; the platinum-tipped spark plugs are warranted for three years; and features the industry’s first automatic summerization function.

The significant improvements in fuel and oil consumption will save 600 H.O. E-TEC owners real money over a season. And the instant throttle response and near elimination of smoke and smell will make this engine a pleasure to own and ride.

We’re really excited about this new technology and hope you are, too.

Look for the New E-TEC website February 4th at www.Ski-Doo.com for more information.

Also continue to check www. Supertraxmag.com as we will have a New 2009 TNT E-TEC for evaluation this month.

Snowmobiling Addiction

0

Fan Contribution:

I have a 2004 800 HO X with 3000 miles of hard trail riding on it. Of all the sleds I’ve had and ridden, this one is the King. It’s brutal fast and handles like a dream.

I have 1 1/4 track 192 Woody’s and Pilots with 10″ and 8″ Stud Boy carbides on it. Aaen Performance Trail Quiet Ceramic Coated pipe, and 440 Mains. Cudney Clutch Kit and Cudney Rings. I have never had any sled keep up and I’m 250 pounds (Mach-Z’s do go by after the 110 mark but who’s counting).

My friend got me started snowmobiling when he was the President of our Club “the Delaware Ohio Snowmobile Club”, and theres no stopping me now.

I have introduced several friends to the sport and We drive to Gaylord, Michigan area several times a year to blast off. Who says being in your mid-40’s is old.

Thank you Supertrax for all the great articles and support.

Warren Butler
Sunbury, Ohio

Which Oil Is Best?

Question:

Dear Motorhead,

I have a question concerning a couple of injection oils that are currently being sold on the market. The two in mind are: Shell Snow Ultra Full Synthetic and Amsoil Interceptor Full Synthetic.

I own a 2003 Summit 800 HO (ZX chassis) and was wondering if your team has experience with one or both of these oils.

I started using the Shell product and had no problems. My exhaust valves were relatively clean and the sleds exhaust didn’t have much smoke and strong smell at all.

I have seen and heard lots about the Amsoil product and its only about 2 bucks extra for the same amount of oil (when buying a 4L jug).

I just started using it to try so I haven’t been burning it long enough to see any results. Do you think the extra 2 bucks is worth it or should I be saving my pennies on this one?

Chad

Thanks for your email!

Both the lubricants you have asked about are – in my opinion – high quality products.

We have used both and found them to deliver excellent cleanliness from both a deposit standpoint on Exhaust Valves and from a smoking standpoint.

Which one is better? Whew – impossible question! I would use whichever one is the easiest to obtain and the most cost effective.

As long as you are using premium quality/premium brand full-synthetic lubes you should expect exceptional performance.

Motorhead Mark

IQ Dragon Handling Issues

Question:

Dear Motorhead,

I have a 2007 Dragon IQ 700. On low speed it is hard to steer and on high speed I can’t turn corners without the ski lifting.

Can you tell me how I can adjust this?

Thank you,

Pat

Thanks for your email!

You have too much ski pressure! You need to put more preload on the front arm shock in the rear skid and reduce the preload on the two front A Frame shocks.

How many inches of carbide are using on the skis? If you have more than 6 inches of carbide or are using a dually or duece double carbide bar your situation will be worse as a result of too much ski pressure.

I would also suggest you move the rear scissors stops to the bottom (most rearward) hole.

This will allow for more weight transfer and might lower steering effort. However, it’s possible this could increase ski lift.

I think your problem is all about too much ski pressure.

Good luck!

Motorhead Mark

Bogging Polaris XC 600

Question:

Dear Motorhead,

I have a 2001 Polaris XC 600 with a polaris 136″ conversion kit. Last time I was in Cooke City I experienced an occasional bog on the low end.

I have a Holtzman Atacc kit and have been very pleased with it on every trip to the mountains with no previous problems. I also have an SLP silencer, flowrites and high flow intake at lower elevations the sled runs flawlessly.

My question is after 4 years of use do parts on the Atacc wear out or do you think it could be something else?

Any input would be greatly appreciated. Keep up the great website!

Casey

Thanks for your email!

I think you have to look at almost everything in your engine given the age and use.

It’s possible you need a re-ring (the bog is a result of the engine being down slightly on power and trying to work with clutching and jetting which do not match its current health) or maybe some clutch parts renewed.

If you didn’t have the bog and now you do a simple answer like “check your jets” doesn’t apply.

Run a compression check and pull the Y-pipe and have a look at the piston skirt for blow-by. This might shed some light on the issue.

Motorhead Mark

Venture Lite Fuel Consumption

Question:

Dear Motorhead,

I am considering buying a Yamaha Venture Lite with the 80 hp 4-stroke but would like to know the expected fuel consumption.

I have done quite a bit of looking on websites but cannot find any facts on the fuel consumption for that machine.

Ski-Doo boasts about having the best fuel efficient engine with the V-800 rated at 30mi/gal (Can).

Yamaha does not make any claims other than to say it is a fuel efficient 4-stroke; so I’m wondering if they are trying to hide something.

Do you guys have any info to share?

Thanks,

Dexter

Thanks for your email!

You’re in luck! We had the use of a Venture Lite last year in our PR fleet and recorded well over 20 mpg on numerous occassions.

The sled did tally 25 once – as far as I know. Having said this – the 80 HP Venture Lite cannot be compared with the Ski-Doo 4 stroke.

After riding the VL myself on a two day tour I would actually own one.

Motorhead Mark

Rough Handling Switchback

Question:

Dear Motorhead,

I recently purchased a 2008 Polaris 700 Dragon Switchback and a 2008 Polaris 600 IQ Shift. One of the main reasons that I purchased the Switchback was because I read a number of articles stating how smooth of a ride the rear suspension provided.

I apparently do not have something adjusted properly on the rear suspension as I seem to get a lot of “kickback” when riding on rough trails.

In fact, I found the the IQ Shift to provide a much smoother ride in those situations. Considering that I paid $3,000 more for the Switchback, I assumed the ride would be smoother.

I weigh approximately 235 lbs (w/snowmobile gear) and have the torsion spring adjustment set to “medium” (4.5″ sag).

I also tried adjusting the knob setting on the rear shock and did not notice any difference.

I then adjusted the FRSS & RRSS blocks and still did not notice any difference.

I would appreciate any suggestions you may have that will help me correct this situation.

Sam

Thanks for your email!

Here’s what we’ve done to our SB’s. Set the torsion springs on either full soft or maybe medium – as you have done.

Open the rear coupler block by removing it and putting it in the rear lower hole. Then rotate the rear block so the skinny side is facing the drop link. This will make for the least coupling in the rear-to-front direction. Got it?

I would take the compression damping clicker to full soft (all the way out) and then move it in one click at a time to compensate for any potential bottoming.

You are kicking back because you’re weight is keeping the sled coupled all the time- essentially from sag. Sag is good but you need to get the drop link uncoupled sooner. This should help.

Motorhead Mark

FINAL WINNERS IN POLARIS ONLINE CONTEST

The final 3 names have been drawn for the Polaris parts, gear and accessories giveaway.

Congratulations to:

1. Justin LaRoche
2. Brad Garland
3. Dean Lebrini

These 3 winners will receive a $100 gift certificate for Polaris parts, gear and accessories!

Many thanks to all participants.

SNOW TRACKERS – The Darting Answer?

By: Mark “Motorhead” Lester

It’s been an amazing start to the winter in just about every area of the North American snowbelt – in particular in areas where snowmobiles are used on trails.

As a result of an abundance of snow, early grooming and lots of sleds on the trails we’ve been inundated with riders complaining about darting and unpredictable steering feedback. Inevitably the “biggee” comes up – “How can I eliminate or at least reduce inside ski lift?”

Truthfully, the dynamics that create inside ski-lift – essentially vehicle center of gravity (CG) and roll centre cannot be altered or changed in any meaningful way to either reduce or control inside ski lift.

The way the sled is built is the way it’s built. You could lose some weight – that might help. However, there is a way to make inside ski lift manageable and to eliminate – I mean eradicate – annoying darting and hunting on trails. Let me talk about the issues sled by sled.

The sleds with the most profound darting issues on the trails we’ve ridden thus far this year are the Yamaha Nytro and the Ski-Doo XP’s – keeping in mind we’ve had lots of snow and the trails are not really hardpack except for a few hours after grooming and freezing. Conditions this year – where we ride – are not at all like last season.

Check out these four features discussing what we learned about our fleet so far.

– WHAT WE LEARNED ABOUT OUR POLARIS IQ
– WHAT WE LEARNED ABOUT OUR YAMAHA
– WHAT WE LEARNED ABOUT OUR SKI-DOO XP
– WHAT WE LEARNED ABOUT OUR ARCTIC CAT F