Home Blog Page 263

2012 SKI-DOO MX ZX 600 RS GETS BIG CHANGES

0

BRP’s 2012 version of the Ski-Doo MX Zx 600 RS will see big improvements in engine and chassis performance to propel Ski-Doo X-Team racers to even more wins this year.

The engine, front and rear suspensions and drive train were all changed with sno-cross and cross country racers in mind.

Headlining the list of changes will be the new engine which delivers an additional six horsepower and better throttle response across the entire operating range.

The list of new components is lengthy but starts with a new crank case, a new patent pending crank shaft design and new cylinders – all directed to provide better flow and higher horsepower.

The engine is designed to be very efficient from 8300 to 8800 rpm with a broad powerband. A new fuel pump and hose routing improves fuel delivery to the muscular monster and new ECM calibrations will complete the power pack.

The front suspension was also analysed for ways to improve chassis performance and balance to better match up with the new skid frame introduced last year.

The change to new, taller spindles improves ski pressure and cornering while the new powder coating will reduce any snow or ice build up.

A redesigned steering post and bushing further reduce any bump steer to non-existent. Finally a new upper A-arm which creates a new steeper caster angle rounds out the geometry package. Racers will notice much straighter tracking through the bumps and better chassis balance front to rear.

The rear suspension was introduced last year as “PCX” but that was only intended to disguise the rMotion name until the consumer version was introduced.

For 2012 the rear suspension is named rMotion Racing. Both skid frames share the same basic geometry featuring a rising rate rear shock and long front arm, but each are optimized for their intended uses. The rMotion Racing has a new reinforced rear arm, improved coupling system, and new reinforced powder coated rails for reduced ice build up.

Once all the new parts were put together, significant time was spent on chassis calibration. All four shocks have been re-worked to deliver more compliant performance in small bumps for less rider fatigue, yet still handle the nasty kickers and big jumps.

The drive train changes were aimed at improved belt and clutch performance to deliver consistent RPM and performance lap after lap.

The new engine mounts are stiffer to keep the clutches better aligned and new specs for the secondary clutch will allow it to float a little to improve belt life.

There’s better venting to the clutches, reducing power robbing heat and the belt itself is new construction for durability and performance.

The deep 19/49 gearing will pull hard to the first turn and optimize clutch calibrations for sno-cross set-ups. The driveshaft mounted brake will also get better venting for cooler running.

Finally the look of the machine changes with a new black powder coated tunnel to further reduce and ice build-up and provide a stealth look, along with new graphics and coloration.

Recap of what’s new:

600 RS Engine – six more horsepower

– New crank case design
– New patent pending crankshaft design
– New cylinder design
– New fuel pump and hose routing
– Broader power band, from 8300 – 8800 RPM

Front Suspension

– New taller, powder coated spindle
– New steering post
– New steering post bushing
– New upper A-arm
– New shock calibration

Rear Suspension – rMotion Racing

– New reinforced rear arm
– Improved coupling system
– New reinforced powder coated rails
– New shock calibration

Drive Line

– New engine mounts
– New sliding driven clutch
– Better venting to clutches
– New Belt
– New 19/49 gearing
– New brake venting

Chassis

– New powder coated tunnel

2012 Polaris 600 IQ Race Sled Unveiled

0

Polaris snowmobile racers head into the new racing season with a leg up on the competition as the 2012 Polaris 600 IQ Race Sled features race-ready suspension calibration that carried Polaris racers to podium finishes in the second half of last season.

The 2012 Polaris 600 IQ Race Sled also features the powerful, title-winning Liberty 600 engine and a white hood with retro graphics that were featured on Polaris production and racing sleds in the 1970s and ’80s.

Plus, technology developed through racing is now enhancing the riding experience of enthusiasts. The Independent Front Suspension (IFS) that provides easy steering and responsive handling in the race sled is now used on several model year 2012 Polaris consumer snowmobiles.

Polaris Snowmobile Racing Manager Tom Rager, Sr., said the race sled’s suspension setup was fine-tuned throughout last season and delivered outstanding performance, so racers will take delivery of 2012 race sleds that are ready to hit the track.

“We have Ben Hayes, who previously worked with Fox Racing Shox and Walker Evans Racing, as our in-house suspension specialist, and he worked really hard on setups last season,” Rager said. “Working closely with our racers, he came up with an incredible setup that two teams used in last season”s final four or five races.”

“We continued testing and development with our racers after the season and made further calibration changes so the front and rear suspensions are better than ever, and we’re going to continue to move forward.”

The current setup features revised shock valving and stiffer rear torsion springs than racers started with on the 2011 Race Sled.

“It delivers improved performance because the suspension is compliant through high speed bumps, and when the sled comes off doubles or table tops, the sled absolutely goes straight,” Rager said. “We gain speed through the rough sections because the sled stays so straight.”

The Independent Front Suspension (IFS) has proved to be so durable and delivers such easy, responsive handling that it is featured on several model year 2012 Polaris production sleds such as RUSH models, Switchback models and Switchback Assaults.

This IFS design requires less steering effort, and provides flatter cornering. Racers will stay fresher throughout a race and be able to run at maximum speed from start to finish. Consumers will also stay fresher and be able to ride hander longer.

The 2012 Polaris 600 IQ Race Sled was developed as a snocross sled, but extensive additional testing was done to fine-tune a chassis setup for cross-country racing.

Crosscountry racers who want to campaign this sled will receive information about how to adjust their shock valving and springs to achieve premium terrain performance.

2012 600 IQ Race Sled Details

The 2012 IQ Race Sled is built on the Polaris-exclusive IQ Chassis, which is strong, durable and lightweight.

Designed for maximum efficiency, the chassis’ part count is minimized and advanced assembly techniques are used to produce the strongest bonds among components.

As a result, Polaris racers compete on sleds featuring maximized structural rigidity and the performance and durability required to win championships.

The IFS uses Walker Evans Aluminum IFP (Internal Floating Piston) 16-position compression-adjustable shocks with piggyback reservoirs and has 10.3″ (26.2 cm) of travel.

The IQ Rear Suspension has a Walker Evans Coil Over Shock as the front track shock, and the rear track shock is a Walker Evans Aluminum IFP 16-position compressionadjustable large body shock.

The rear suspension has 13.9″ (35.3 cm) of travel. Under the hood is the class-leading, liquid-cooled Polaris Liberty 600 twin, which has dual Mikuni Rack TM 40 carburetors, NiCaSil-lined cylinders for optimized heat dispersion and the Polaris VES (Variable Exhaust System) for outstanding power and instant throttle response.

Managing the power delivery is the legendary Polaris P-85 clutch, and for braking the race sled has a Cyclone master cylinder and lever and a liquid-cooled Phantom dual-piston caliper.

Information about the complete line of Polaris products, apparel and vehicles accessories are available from authorized Polaris dealers or anytime at www.polarisindustries.com.

2012 ARCTIC CAT SNO PRO 600 UNVEILED AT HAYDAYS

0

Hibbert to Defend Pro Points Championship aboard ProCross Race Chassis

The official start to winter kicked off today at the largest snowmobile event in the world – Haydays.

Thousands of loyal Team Arctic race fans were treated to the first unveiling of the all-new 2012 Arctic Cat Sno Pro 600 race sled.

70’s fashion Icon, Cat Girl unveiled the all-new 2012 Sno Pro 600 and conducted a walk-around with Performance Product Team Manager Troy Halvorson.

Halvorson said the all-new Sno Pro 600 will build upon last season’s winning success and the success of the recently introduced ProCross chassis.

Key highlights include:
– All new ProCross Race chassis – Stronger and lighter than 2011 Sno Pro 600
– 600R race engine with 40mm Mikuni rack style TM carbs w/TPS
– Front Arctic Race Suspension (ARS) – with Fox Float X Evol Shox
– All-new Race Slide Action rear suspension equipped with Fox Racing Shox
– 1.7-in. Snocross track or 1.25-in. Cobra 2-ply Cross Country track
– Arctic Drive System (ADS) with magnesium chaincase and all-new Torque Overloading Sensing (TOS) bottom sprocket
– Torque Control Link (TCL) – Links the drive to driven clutch
– Radial Master Cylinder brake system
– 5 gallon Snocross or 12 gallon Cross Country fuel tank

“Racing has been a strong cornerstone of Arctic Cat’s heritage and brand. An arena we have consistently used for testing and development. It’s our commitment to race the ProCross chassis and show the world that our consumers can buy the same snowmobile to conquer the world’s toughest terrain.” said Brad Darling, GM Snow Division.

Defending his ISOC Pro Points Championship Title, Tucker Hibbert will race the full season aboard the all-new 2012 Sno Pro 600 as well as compete for his sixth-consecutive ESPN Winter X Games gold medal.

If he wins, Hibbert will become the only athlete in the history of Winter X to six-peat.

Hibbert has competed every year since 2000 and currently holds 10 medals, six of which are gold.

Arctic Cat CEO Claude Jordan stated, “Our talented engineers have built our best Sno Pro race sled to date, and that says a lot considering we won every major race or championship title last season. It’s going to be a tough year for our competition, but an even better year for our Team Arctic race fans!”

About Arctic Cat and Tucker Hibbert – Arctic Cat Inc., based in Thief River Falls, Minn., designs, engineers, manufactures and markets all-terrain vehicles (ATVs) and snowmobiles under the Arctic Cat brand name, as well as related parts, garments and accessories. Its common stock is traded on the Nasdaq National Market under the ticker symbol “ACAT.” More information regarding the all-new 2012 Sno Pro 600, and other Arctic Cat products please log on to www.arcticcat.com or visit your local dealer.

Switchback Adventure: Is This Really New?

0

Polaris is looking to break a new segment this year with a Switchback Pro-Ride Variant called the Adventure.

This re-packaged 136 has some easy-to-identify standard equipment more familiar to touring mounts.

There’s a super-high windshield and nifty little side panel mounted dinosaur fins that deflect air away from the pilot’s knees and legs. There’s also a 12-volt power port and standard E-start.

Here’s where the adventure begins. Polaris ATVs have an accessory attachment system called “Lock’n Ride” that uses grippy, expanding rubber donuts to attach all manner of storage containers and functional accessories to Sportsman ATVs and Ranger side-by-side vehicles.

The new Adventure Switchback has a Lock’n Ride compatible aluminum rear rack that facilitates the mounting of ji-normous saddle bags and other interesting things you might not normally have thought you could carry.

The system is uber-versatile and very techy in appearance. For the record, the Adventure does not come with a 2-up seat. It is a solo ride by design.

However, we think two average sized riders would be quite comfortable on the stock solo saddle with the Lock’n Ride bags in place.

One thing is for sure: You cannot possibly pull-off or lose Lock’n Ride attachments. Once installed they stay put until you release them.

ProCross 800: Light, Tight and Handles Right

0

When we Rode the new ProCross Cats in West Yellowstone last March we were impressed with the initial sensation of the lightness of the 800.

The sled seemed to respond instantly to positional changes or weight shifting from the cockpit.

Even though the low weight of this chassis was evident, the skis felt very planted and steering was dead neutral and very predictable.

We weren’t expecting this kind of handling from Cat. A decade ago the company was renowned for its razor edged handling on the ZR series but sometime during the Firecat, Crossfire and Twin Spar years it became a distant memory.

The weight drop evidences itself when you get into the throttle on any of these sleds. Throttle response is instantaneous and very linear in its application.

From clutch engagement all the way through the tach digits this 800 doesn’t give up. The pull is phenomenal.

Cat has incorporated a new system called Arctic Drive System with TLC (Torque Control Link) that integrates the engine mounts, jackshaft mounts and secondary so the clutches’ center-to-center distance is always the same.

With belt deflection 100-percent constant, power is always being transferred through the driveline at its maximum potential, and you can really feel the difference it makes.

Same thing goes with the Turbo version. If you could ever describe a snowmobile as having too much power, it would have to be this one.

The launch on this thing is crazy – borderline insane – and corners come up so fast you’re constantly on the brakes and overcorrecting into the apex.

For a big sled, this one handles remarkably well, though, and although it feels more top-heavy than the svelte 800, compared to its max-power 4-stroke competitors this is still the lightest feeling, best handling big-inch 4-stroke out there.

BRP XP-R CARBON LIGHT HELMET LINE EXPANDED

0

When it comes to lightweight helmets nothing matches the BRP XP-R Carbon Light which is 25% lighter than all other helmets in its category.

New this year will be two more colors, Blaze and Bronze, to compliment the popular Black.

The XP-R features Multi Directional Carbon Fiber (MDCF) construction using carbon and aramid fibers to form a super lightweight, yet extremely strong shell with the weight of a size large at about 1275g.

A tool less multi adjustable wide front peak incorporates an anti reflection sticker on the underside to reduce glare.

A large flexible nose deflector is included with each helmet for great wind protection and the integrated rear fin helps with stability at speed.

The surround comfort sanitized liner features Coolmax moisture wicking action which is removable for easy washing, and the Morpho System Plus ergonomic 3D cheek pads are removable, washable and available in different sizes to customize your fit.

With ten ventilation points, air flow through the helmet to keep you cool is a sure thing.

XP-R Carbon Light $449.99 USD/$499.99 CDN

QRS QUICK CHANGE BRP CLUTCH KIT

0

BRP will be offering a new QRS quick change secondary clutch kit for those riders looking to fine tune their sleds more easily.

The new kit also provides great value because it uses some existing parts allowing it to be priced very competitively.

Called the Floating QRS Short Shaft Conversion kit, it allows removal of the secondary clutch without removing the countershaft and makes changing helixes and springs faster and easier.

Now you can make a change to your clutch calibration and be testing it minutes later. Riders looking to squeeze the most performance possible from their snowmobile will appreciate this kit the most.

Included are all the parts needed: gun drilled lightweight countershaft, fixed clutch half, bearing mount, bearing and all hardware.

When installing the kit, the sliding half, spring and helix are re-used so the current calibration remains the same until the rider decides to change it.

Kit fits 600 Sport, 600 E-TEC, 800 P-TEK, and 800 E-TEC engines
# 860 200 565
$449.99 US/$514.99 CAD

Is rMotion Really True Rising Rate?

0

True rising rate? Whatever. In our books it’s all about the ride.

We discovered on our day-long blasts at both insane speeds and trail cruising velocities, the rMotion is competent at both disciplines with little, if any, adjustment required.

To date, we haven’t seen a suspension with such a broad range of plush impact response.

The secret lies in a number of elements. Most notably, in a late coupling moment combined with a rapid rise in shock rate as the skid compresses.

This late coupling moment provides an incredibly plush response to irritating stuff common on Saturday afternoon trails.

With the coupling moment moved later in the suspension’s stroke there’s another element of rideability added the current SC-5 cannot produce: Weight transfer on exit from corners.

For the past dozen years, weight transfer and resulting inside ski-lift on turn exit has been controlled by hard coupling, producing a level and flat response to turns.

Uncoupling the skid would, at first glance, infer the sled might stand up and wheelie on exit, increasing inside ski lift.

Why doesn’t the rMotion produce this response? It’s all about the skidframe’s front (torque) arm.

The rMotion uses the longest front arm we’ve seen on a sled. So long is this torque arm it actually intersects the rails at a point that’s more than 50-percent back from the rail tips!

This long front arm provides an amazing degree of control over ski-lift, control the pilot can modulate with his or her right thumb.

You can make it pull heroic wheelies, but only when you want them. This means the rMotion gives a vastly improved small and big bump ride, with less coupling, without increasing ride height, with more weight transfer and with the ability to control the weight transfer more precisely.

HAY DAYS IS THIS WEEKEND!

0

Drop By and Visit Us While You’re There!

We’re at Hay Days again this year with our Supertrax and Snowtrax TV display but we’re on a mission while in attendance at the sport’s largest, premiere kick-off show, swap meet and grass drags.

Seems Luke and AJ Lester will be looking for a good, used Yamaha SnoScoot this year with Luke a new father since March and AJ waiting for the arrival of his first the end of September.

Hopefully, there may be a project Sno-Scoot in the SnowTrax Television Trail Tech Shop before the snow flies!

Stay tuned and be sure to drop by our booth this coming weekend and say hello!

If you have any leads on a SnoScoot for the guys, send us a message here!

2012 Ski-Doo Snowmobile YouTube Video

0

Pretty sweet promo video for the 2012 Ski-Doo snowmobile lineup. Doesn’t matter what brand you ride, the videography is pretty epic and will get your heart racing.