Home Blog Page 219

2014 VIPER SELECTIONS ARE PRETTY COOL

0

There will be three different levels of Viper sleds offering three different track lengths from Yamaha for 2014.

The bright blue with white accents Viper RTX SE (also available in red and black) will feature Fox Float 2 air shocks on the front and Fox IFP gassers in the skidframe, along with a 1.25 x 129-inch RipSaw track. The skidframe is Yamaha’s adaptation of the ProCross Cat’s Sliding Arm setup using coupler blocks and torque links merged with a sliding front arm.

A base 129-inch model called the SR Viper is offered in black with red accents utilizing IFP gas shocks up front and IFP gassers in the skidframe calibrated for a plusher trail ride. A 1.25 RipSaw II track, a heated seat and a higher windshield are standard on this sled.

The 137-inch Viper LTX SE (also offered in blue/white or red/black) will appeal to trail targeted crossover buyers who want extra track length for forays into powder without sacrificing trail maneuverability and high quality ride.

This sled has the same fully equipped skidframe design as the 129-inch RTX SE series and sports a 137×1.25-inch deep track. Rebuildable, aluminum high pressure gas shocks are used in the skid and Fox Float 2s up front.

Even the slightly tamer base model Viper LTX (black with red accents) still includes a 137×1.25 inch RipSaw II, gas shocks front and rear, a heated seat and a mid-height windshield.

The RS Viper XTX SE (available in choices of blue/white or red with black accents) offers a dual shock 141-inch skidframe and track, Fox Float 2 air shocks up front and a Float air on the rear arm. This one also uses plastic mountain skis (slightly wider) and has a tall handlebar riser for stand-up riding.

As mentioned, all Vipers will run Yamaha’s EFI 1049cc 4-stroke triple with three throttle bodies and Yamaha clutches.

SO WHAT’S UP WITH YAMAHA?

0

If you’ve got your pulse rate settled down after the big news about the 2014 Yamahas, you’re probably asking what the heck is going on with this marriage of two very significant players in the snowmobile industry.

First thing: Both Arctic Cat and Yamaha swear this is neither a marriage nor a partnership, a buy-out, a sell-out or a harbinger of either. Yamaha and Arctic Cat are still separate and individual entities and there has not, nor will there be, any transfer of shares or holdings between the two companies. This is solely a manufacturing agreement that has significant benefits for both companies.

How? By building Yamahas in TRF, Arctic Cat gets to amp up its production numbers and can benefit by economies of scale when dealing with suppliers. It’s just a lot more practical to build a whole bunch of something instead of a smaller number.

On the other hand, Yamaha can make a quantum leap into the next generation of its products without the need to invest mega-bucks in research and development as it would with a completely new from-the-ground-up platform.

Note: Yamaha is still making a significant investment in R&D with the Viper but its investment is still millions of dollars less than it could have been.

Unless you haven’t noticed, the Rec industry, along with every other one, has been going through a recession the last five years and much of the money invested in survival by all companies has come from cuts to R&D budgets.

Does this look like Yamaha is getting out of the snowmobile business? Frankly, we can’t see any less commitment to the snowmobile biz than Yamaha had before. The fact is, this giant-step, unconventional approach is far more risky than anything we’ve seen in the recent past from any Japanese company.

Think about it this way: Would it have indicated a stronger commitment if Yamaha had continued to simply build nothing but the same sleds it did before? That line of thinking does not hold water because the Viper is going to guarantee a huge increase of traffic into Yamaha dealer showrooms and will answer many of the weight-issue questions customers have been asking for several years.

Suddenly Yamaha dealers will be offering a completely new line of sleds that cover the bases in categories Yamaha hasn’t been competing in.

Yes, some short-term thinkers will swear off the brand and simply refuse to accept the Viper as a “real” Yamaha.

We’d like to suggest for every one of those individuals, there will be double who will accept and love this change of direction.

Comments?

YAMAHA’S BLOCKBUSTER YEAR!

0

We’ve been busting to tell you what Yamaha has been up to and believe us, our heads are still reeling even though we’ve known about the 2014 model line-up for a few weeks now.

Yamaha is the big story this year and it will change the industry rules in a significant way.

If you’re looking at the photos, you no doubt have noticed the 2014 Yamaha Viper looks a lot like an Arctic Cat. You’re not mistaken.

The new Yamaha snakes are being built in Thief River Falls, Minnesota and do share a lot of the technology with Cat’s ProCross series of sleds.

However, there are significant differences. First, all the new Vipers will have the rock-solid 1049cc Yamaha 4-stroke triple underhood – the one we’ve grown to love in the Vector, Venture and Nytro.

This bulletproof engine mounted in the Viper has a modified exhaust that instead of running under the seat and out the rear of the sled in typical Yamaha style, runs back under the front of the seat and exits at the right side front in a conventional exiting manner with the muffler located behind the right side engine panel.

There’s still a cooling effect with the front half of the 3-into-one pipe exposed to the air and snow inside the tunnel.

All Vipers will be using Yamaha’s 8.3-inch diameter primary and external helix secondary clutches. These tried and true clutches have a proven history of delivering incredible belt life and have been specifically tuned to suit this sled.

Look closely and you’ll notice there are cosmetic changes to the hood, side body panels, digital gauges and the windshields are definitely Yamaha-specific. All colors are reminiscent of current and past Yamahas – and the name Viper, for those who remember nearly a decade ago, was one of Yamaha’s most popular and best-selling marques.

Vipers will be offered with Yamaha-specific tracks in 129-inch lengths as well as a 137 and a 141. The 137-incher is designed for the trail-focused end of the crossover market and uses a fully coupled sliding arm style skidframe as does the 129. The 141 uses Cat’s very light mountain version skid without couplers, rate adjusters, torque links or a sliding front arm.

The sleds are being built to Yamaha’s exacting specifications. Suspension, drive system, fuel delivery, assembly calibrations and settings are being overseen by Yamaha engineers.

Shocked? There’s way more!

5 THINGS WE DIG ABOUT YAMAHA SLEDS

0

Okay, we’ll go out on a limb here and shoulder all the accusations of sucking up to the manufacturers. Feel free to send us your comments dissing us for loving one OEM more than the others. We’re ready.

We did have a discussion the other day, though, about the strengths we see in Yamaha’s snowmobile line-up and stuff we hope they will never take off the table as new products are developed. Here’s our list (we might do one of these for all of the OEMs, come to think of it):

1. Engines:

Yamaha is first an engine manufacturer and, man, are they good at it. Try to think of a single snowmobile engine that’s been about 99-percent bulletproof over its entire production run. It’s a Yamaha, right?

Now think of a company whose complete engine line-up has been incredibly reliable for the better part of a decade. Warranty claims are rare with any of these 4-strokes and unless they’ve been horribly abused, radically modified or smashed repeatedly with ball peen hammers, pretty much the whole fleet is still running. Incredible.

2. MonoShock:

This skidframe has so much going for it (ride quality, light weight, design simplicity) and it has not received enough credit for its performance. Since day one it has been used in sleds that are heavier than its competitors but it has always delivered a premium ride at the top of the industry. We stated earlier we’d love to see this skid in a sled that weighed 100 pounds less.

3. Clutches:

Yamaha’s primary and secondary clutch design is well calibrated, durable beyond sanity and offers such incredible belt life even on its highest performing engines, it defies logic.

4. Finish Quality:

You just never see a Yamaha sled that has mismatched panels, bad paint or stuff that doesn’t work the way it claims. The company’s ability to pre-test and work out glitches on new models before they are presented for sale is unprecedented and borders on the obsessive. It’s been the same for decades.

5. Resale:

Obviously the word is out on used Yamahas because it’s tough to score deals on anything used from an RX-1 to an Apex to a Vector. Why? Most of these sleds look and perform pretty much the way they did when they rolled out of the showroom.

Once again, if the former owner was into gross abuse, the theory may not hold water – however, any used Yamaha that has had basic storage and maintenance care over its life will bring top dollar.

IS POLARIS WASTING TURBO TECH?

0

2013 was a pretty clear indication Polaris isn’t focusing on either 4-stroke or turbo technology in the future.

Actually, since the intro of the RUSH and the Pro-Ride suspension, Polaris has clearly been moving away from delivering sleds with 4-stroke engines and has cut back production of its Weber-turbo package until it’s only offered in one 2-up sled for 2013.

We’ve had press sleds of this ilk in our fleet (Turbo Touring, Turbo LX, IQ Turbo) over the last few years and have always rated them as close to the top in our preferred rides. Every single time, we’ve found them to be fast, fun, reliable and – did we already say fast?

Unless you’ve ridden one of these sleds you can’t fully appreciate the level of performance they deliver. These are hyper-class sleds with power so impressive it feels like Polaris’ rating of 140-hp is an insult.

True, the turbo is programmed to amp up the boost, producing power of about 160-hp for a few seconds when you tip in the throttle, but this engine, in any of the platforms Polaris has been using it in, is way fast – way fast.

Warning: Don’t pick a drag race with one of these sleds when you’re riding an 800 2-stroke. It takes a really good one to beat this turbo down the lake.

So what’s the deal with Polaris not wedging this mill into the Pro-Ride? We dunno. It’s probably one of the best-kept performance secrets in the biz.

Actually, from the outset, it just hasn’t sold in very good numbers and that’s probably why Polaris doesn’t put much marketing emphasis on it. We think this sled, in the right chassis package (like the Indy), could resurrect the company’s confidence in building 4-strokes.

Arctic Cat has had substantial success with its turbocharged hypersleds and Ski-Doo may decide to move in the same direction.

It just seems like such a waste to shelve this great Polaris engine package when it’s so doggone good.

Waddya think?

ARE ALL CAT ENGINES BUILT IN AMERICA FOR 2014?

0

Arctic Cat has made it pretty clear it’s shifting its engine production to North America beginning this year and it’s no secret the company’s relationship with Suzuki has been wrapped up.

On the 4-wheeled side of things, Cat has been building its 4-strokes for the Prowler, Wildcat and its ATVs in a very modern plant in St. Cloud, Minnesota, about an hour west of the Twin cities for several years now.

However, we’re a bit curious about the enormous undertaking of the company to suddenly assemble every snowmobile engine in the USA and none in Japan in a single year.

Frankly, we could see a couple of the sno-mo-engines coming from St. Cloud this year, but self-building the whole fleet of everything from fan-cooled 570s to turbocharged 4-strokes is a bit of a stretch and could lead to a potential mess of reliability issues, couldn’t it?

Apparently, the St. Cloud plant has plenty of capacity and lots of room for expansion – this is a factor Cat has been calculating for several years as the Suzuki relationship has wound down.

The other thing to note here is that the ATV and SxS engines Cat has been building in the USA have been really bulletproof.

We recall when they moved the 500 class ATV engine over to the US facility, our test units suddenly went from being the slowest in that category to the fastest.

Out best guess for MY 2014 would be the company will build its well-tested 1056cc 4-stroke in St. Cloud and that Suzuki, under contract, will continue to build its 2-strokes for a few more years.

We’ll know in a few weeks so stay tuned.

DOOTALK REACHES 100 THOUSAND MEMBER MILESTONE

0

DOOTalk.com has become the first snowmobile enthusiast website to hit the 100,000 member milestone. Started in 2002, DOOTalk.com is the premier resource for SkiDoo snowmobile enthsiasts.

To celebrate reaching this milestone, DOOTalk.com is holding a 100K Member Sweepstakes that is running through the end of March. The winner will receive a prize package worth $3,000.

DOOTalk.com is owned and operated by DOOTalk, LLC, Churchville, NY. Register at dootalk.com

NOTE: CLARIFICATION IN SUPERTRAX ARTICLE

0

If you picked up the latest issue of Supertax you may have read our story on synthetic oil entitled: “Is Synthetic Oil Worth It?”

On page 40 of that story we mentioned that a company called Hatco originally synthesized poly-alpha-olefin esters to produce ester-based synthetics for aircraft and automotive engines.

This part is accurate. However, we inferred in brackets that AMSOIL was the same company. The fact is Hatco was not associated corporately with AMSOIL.

These two have always been separate companies and although AMSOIL may have utilized some base stocks synthesized by Hatco, there are a number of different suppliers that could have done so also.

AMSOIL was one of, if not the earliest company to offer ester-based synthetics for automotive engines.

Its research highlighted the unique molecular structures true synthetics possess when compared to petroleum-based synthetics.

CBR Headed to Finland for FIM World Championship

0

Fresh off the ISOC Turtle Creek’s US27 Snocross in Traverse City, Mich., Christian Brothers Racing riders Logan Christian and Garth Kaufman are headed to Tuuri, Finland, to represent the United States at the FIM Snowcross World Championship.

Originally scheduled as a three-race points championship, the Snowcross World Championship format was changed to a one-race event set to be held February 16 in Tuuri. Tuuri also hosted the event in 2011; last year the World Championship was held in Semigorje, Russia.

“Garth and I are really excited to be representing the United States a the World Championship in Finland,” said Logan Christian. “Some of the rules are different, but it won’t take long for us to get our DRIFT Racing/Troy Lee Designs/Arctic Cats up to speed. We are hoping to bring the championship home to America again this year!”

The team will be helped by Bengan Westerlund who will prepare the machines Garth and Logan will race at the event. Unlike Open class rules here, the team will have to run a stock pipe, pump fuel and studs are not allowed.

Christian is used to racing under European rules as he has competed at Clash Of Nations and other events overseas. The event will be streamed live as well as televised on FOX International Channels Asia.

“We are looking forward to racing at the World Championship this weekend,” said Christian Brothers Racing co-owner Dwight Christian. “Representing Arctic Cat and the United States at the event is definitely an honor for us.”

Christian and Kaufman are coming off a tough weekend of racing at the ISOC Turtle Creek’s US27 Snocross. Christian finished 12th in one final after he got hit by another rider and knocked off his sled; in the other ran into bad luck with a 10th place finish. Garth landed a pair of solid 6th and 7th place finishes.

“We had high hopes and a lot of momentum coming out of the last race in Deadwood, South Dakota, where we ended up on the podium.” said Dwight Christian. “We lost a little in Michigan, but we’re hoping Garth and Logy can get it back in Finland and we can carry it through the rest of the season.”

Team 23 Ready For Iron Dog

0

Recognized as the longest snowmobile race in the world, the Iron Dog traverses 2,000-miles of some of the most rugged and unforgiving terrain Alaska can dish out.

Readying for his second attempt at the race, Christian Brothers Racing rider Brian Dick will be on the start line this coming Friday as one half of Team 23.

Last year he paired with his father, Paul Dick, but they weren’t able to finish the race. This year Brian will be paired with 2008 race winner Eric Quam who has a ton of Iron Dog experience.

He has competed in every Iron Dog since 1999 either as a rider or crew and won the race in 2008 when he was paired with Marc McKenna.

He has also paired with multi-time race winner Todd Palin in past events. Team 23 will ride a pair of specially-prepared Arctic Cat Sno Pro 600 race sleds.

The Iron Dog is scheduled to start February 17 at Big Lake near Wasilla. From there, riders will head West to Nome, then turn back East and race to the finish in Fairbanks.

The racers will arrive on February 23 and when they are done they will have raced for a full seven days and traveled some 2000 miles.

The Iron Dog first ran in 1984 and the course roughly follows the famed Iditarod Trail. Competitors race in pairs and riding and mechanical as well as survival skills are essential.

“The Iron Dog is a big race, it requires a lot of resources and effort,” said Brian Dick. “This isn’t a race you enter and win the first time out, you need to run it a few times to learn all the secrets. Last year I was paired with my dad Paul and we learned a lot. This year I will be paired with Eric Quam – he’s won this race and I am looking forward to competing with him.”

“Brian is a smart racer and as one of the engineers behind the Arctic Cat race sled no one knows the machine better than he does,” said Christian Brothers Racing co-owner Dwight Christian. “He and Eric have all the skills and know-how to do well in this race, so the team is really excited for them.”