2020 SKI-DOO SUMMIT 850 TURBO
The Ski-Doo Summit 850 E-TEC Turbo is a snowmobile that completely redefines high elevation riding and takes the industry to new heights. Riders will experience factory-built power in a way never before attainable until the Summit 850 E-TEC Turbo.
Riders also get never before seen manufacturer-backed ease of use and peace of mind - because this is the world’s FIRST EVER OEM-built 2-stroke turbo engine.
The high elevation experience gets easier and more fun as deep snow pilots get the same kind of power their low elevation comrades have had for years, with no turbo lag and the same renowned ultra-quick throttle response Rotax 850 E-TEC engines are famous for.
The first ever factory produced 2-stroke turbo also lets riders enjoy centrally balanced handling, lighter weight and consistent performance, as altitude increases. Peace of mind is part of the package too with perfect factory integration, accurate calibration at all altitudes, in all conditions and the reassurance of a factory warranty.
Riders will enjoy every ounce of the 165 horsepower from the industry's leading 2-stroke engine to its fullest, all the way to 8,000 feet (2438 m) in altitude. They continue to enjoy a 40-hp advantage over non-turbo 850’s from there up on the way to discovering stunning new winter playgrounds.
This 2020 late release Ski-Doo model begins with the REV Gen4 platform. So responsive, a simple glance is all it takes to point it in the rider's desired direction. There’s no deep-snow snowmobile that translates the relationship between rider, sled and epic terrain better than the Summit.
More than a new engine, it's a complete lightweight, turbocharged package fully designed by Rotax and Ski-Doo. In addition to delivering all its power at less weight than aftermarket turbo kits, the optimized layout in the chassis keeps the sled balanced side to side for easier handling. Available at dealers now, the Summit 850 E-TEC Turbo also comes standard with a new one-piece lightweight hood.
Highlights of Summit 850 E-TEC Turbo
• Rotax designed and built turbocharged engine
• First mass production 2-stroke turbocharged engine in any vehicle
• 165 horsepower up 8000 feet (2438 m) elevation, +40 horsepower over normally aspirated 850 E-TEC above that
• Runs on pump gas
• Factory integration delivers balanced handling and accurate calibration
• Factory warranty
• One-piece lightweight hood
• Available at authorized Ski-Doo dealers now
Technology background for Rotax 850 E-TEC Turbo
Designed specifically for the 850 E-TEC entirely within Rotax walls, the new turbo ensures full use of the 850 E-TEC's 165 horsepower all the way up to 8000 feet and then maintains a significant 40-horsepower advantage over normally aspirated engines from 8000 feet to the top of any mountain.
When designing the new 850 E-TEC Turbo engine, four key factors were front and center for Rotax and Ski-Doo engineers to ensure optimal consumer satisfaction:
1. Responsive power delivery with no lag,
3. light weight
4. seamless integration into the responsive REV Gen4 platform.
Optimizing power at minimal boost was critical for both throttle response and longevity. An intake with a short-track bypass tract keeps throttle response crisp and quick, while the streamlined exhaust system minimizes backpressure.
An electronically controlled wastegate maintains consistent boost pressure (up to 4 PSI) and delivers it precisely as needed, to ensure the dynamic performance characteristics of the 850 E-TEC are never lost.
The in-house Ski-Doo/Rotax design advantages are immediately felt when riders experience how flawlessly the turbo package performs from idle to wide open throttle and how it integrates with the rest of the snowmobile. The compact turbine and compressor are ideally fitted within the REV Gen4 chassis.
The lightweight material along with a patented lightweight continuous oiling system and optimized down pipe are laid out to ensure the entire powerpack stays centrally balanced within the frame.
It's all wrapped in a new one-piece lightweight hood and unique side panel with strategically placed venting for optimal cooling of critical power-producing components, and sleek, sexy styling.
We are a global leader in the world of powersports vehicles, propulsion systems and boats built on over 75 years of ingenuity and intensive consumer focus. Our portfolio of industry-leading and distinctive products includes Ski-Doo and Lynx snowmobiles, Sea-Doo watercraft, Can-Am on- and off-road vehicles, Alumacraft, Manitou and Telwater boats, Evinrude and Rotax marine propulsion systems as well as Rotax engines for karts, motorcycles and recreational aircraft. We complete our lines of products with a dedicated parts, accessories and clothing to fully enhance the riding experience. With annual sales of CA$5.2 billion from over 120 countries, our global workforce is made up of more than 12,500 driven, resourceful people.
More Like This
LATEST VIDEOS View All
Snowmobiling Algoma Country PART 2
January 21, 2021
In part 2 of our special Northern Ontario snowmobile destination ride. Luke and his good buddy ...
2021 Polaris Indy 650 MATRYX VR1 Review
January 20, 2021
Motorhead Mark presents his impressions of the 2021 Polaris Indy MATRYX VR1 featuring the ...
Snowmobiling Algoma Country in Northern Ontario
January 14, 2021
In a special two-episode Northern Ontario snowmobile destination ride, Luke is joined with ...
2021 Polaris 850 Switchback Assault 146 Review
January 13, 2021
In this TEST RIDE AJ evaluates the 2021 Polaris Switchback Assault 146 in the all-new MATRYX ...
Snowmobiling in New York: Hamilton County / Adirondacks
January 7, 2021
Matt Lester and his daughter Madeline take an epic father/daughter adventure to Hamilton County ...
Top Gear View All
January 18, 2021
IPONE MAINTENANCE & CARE LINE
Getting the most out of your snowmobile requires a lot more than just topping up the oil reservoir whenever you go for a ride.
Ask Motorhead View All
November 15, 2020
600 EFI, 600 ETEC or 900 ACE?
Mark takes a look at which of these sleds is right for a reader...
Press Releases View All
January 20, 2021
2021 KLIM Frozen Cow Tag Snowbike Ride
Join KLIM, Timbersled, Rever and Trail Tech for the third annual snowbike ride in the rugged Idaho mountains on March 20, 2021.
Tourism View All
November 1, 2020
5-STAR SLEDDING IN CHARLEVOIX
Rarely does a specific hotel earn universal recognition as a must-visit snowmobiling destination...